Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 25820699
Shock Absorber

2002-2009 GM

Customer Questions & Expert Answers (12)
GM 25820699 Shock Absorber
GM 25820699 Shock Absorber
GM 25820699 Shock Absorber
GM 25820699 Shock Absorber
  • Part Description
    Shock Absorber
  • Position
    Rear
  • Replaces
    15159645, 15172343, 15206892, 15894447, 15172340, 25865982, 25820694, 15159648, 15172342, 15894449, 15894448, 25820695
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 25820699 Shock Absorber is Ref No. 5 in the diagram below

    2005 GMC Envoy XUV Shock Absorber Diagram for 25820699
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 25820699

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25820699 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25820699 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step before completing the process for the 2007 Buick Rainier? Posted by Customer
    A:
    Reinstall the tire and wheel before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How should the shock absorber be positioned for drilling for the 2004 Buick Rainier? Posted by Customer
    A:
    Clamp the shock absorber in a vise horizontally with the shock absorber rod fully extended.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the torque specification for the lower mounting bolt for the 2006 Buick Rainier? Posted by Customer
    A:
    Tighten it to 80 Nm (59 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the first step to replace the shock module for the 2005 Buick Rainier? Posted by Customer
    A:
    Remove the shock module upper retaining nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done after tightening the upper mounting nut for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the support from the rear axle and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the next step after removing the shock absorber for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Loosen the compressor forcing screw to allow for the removal of the upper mounting plate and coil spring from the Strut Spring Compressor (J45400).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done after removing the upper retaining nuts for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Raise and support the vehicle, taking care when handling the coil springs to avoid damaging the coating.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the next step after installing the lower mounting bolt for the 2008 GMC Envoy? Posted by Customer
    A:
    Install the upper mounting bolt and tighten the upper mounting nut to 85 N.m (63 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the next step after removing the bolts for the 2007 GMC Envoy? Posted by Customer
    A:
    Take the shock absorber out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the first step to replace the shock absorber for the 2003 GMC Envoy? Posted by Customer
    A:
    Raise and support the vehicle, ensuring the rear axle is not allowed to hang freely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should you avoid doing with gas charged shock absorbers for the 2006 GMC Envoy? Posted by Customer
    A:
    Do not remove the snap ring from inside the top of the tube to avoid the risk of personal injury from the contents being expelled with extreme force.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Shock Absorber 25820699 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25820699 Shock Absorber is available in the market under the name GM Shock Absorber. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25820699 Shock Absorber fits certain Chevrolet Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 25820699 maintains top performance when functioning as the Shock Absorber unit at its Rear. The component 25820699 is constructed from durable material and its dimensions span 28.0 x 4.3 x 3.8 inches while weighing 3.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Shock; Absorber, Front And Rear Suspension. The part 25820699 has available replacement options 15159645, 15172343, 15206892, 15894447, 15172340, 25865982, 25820694, 15159648, 15172342, 15894449, 15894448, 25820695. Each vehicle needs 2 units of the part marked as SKU 25820699. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.