Make sure this part fits

GM 10412899
Coil Spring, Rear

2001-2007 GM

Customer Questions & Expert Answers (13)
GM 10412899 Coil Spring, Rear
  • Part Description
    Spring, Rear Spring; Coil Springs
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2005-2006 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2006 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2001-2005 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
    2005-2006 Pontiac MontanaSV66 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005 Saturn Relay2, 36 Cyl 3.5 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10412899 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10412899 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What tool is needed to hold the strut shaft while removing the upper strut mount nut for the 2006 Buick Rendezvous? Posted by Customer
    A:
    A 45 TORX® socket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What needs to be disconnected from the lower control arm for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Disconnect the height sensor link, the speed sensor harness connector, and the harness from the control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the next step after attaching the spring components to the lower control arm for the 2005 Buick Terraza? Posted by Customer
    A:
    Raise the lower control arm with the utility stand.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the assembly process for the strut for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Install the coil spring and upper strut mount back into the Strut Spring Compressor (J45400) and compress the coil spring again.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the first step to service and repair the suspension strut for the 2006 Buick Terraza? Posted by Customer
    A:
    Begin by removing the strut from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should be done after installing the springs and insulators for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Raise the rear axle with the utility stand, reattach the rear axle tie rod, and install the shock absorbers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should be removed after raising for the 2003 Buick Rendezvous? Posted by Customer
    A:
    The rear wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    How should the lower control arm be supported for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Use a utility jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the final step after assembling the strut for the 2005 Buick Terraza? Posted by Customer
    A:
    Remove the strut from the Strut Spring Compressor (J 45400) and install it back into the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should be removed from the lower control arm for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Remove the stabilizer link from the lower control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the first step to replace the coil spring with independent rear suspension for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Begin by raising and supporting the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the next step after installing the coil spring for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Raise the lower control arm with the utility jack to load the suspension.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Coil Spring, Rear 10412899 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10412899 Coil Spring, Rear is available in the market under the name GM Coil Springs. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10412899 Coil Spring, Rear fits certain Chevrolet Uplander models, as well as Buick Rendezvous, Terraza. Additionally, it is compatible with Pontiac Aztek, Montana and Saturn Relay models.
The original GM component designated by manufacturer part number 10412899 maintains top performance when functioning as the Spring, Rear Spring; Coil Springs unit at its Rear. The component 10412899 is constructed from durable material and its dimensions span 14.3 x 6.3 x 6.1 inches while weighing 6.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Spring, Rear. The part 10412899 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 10412899. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.