Make sure this part fits

GM 25716669
Lower Control Arm, Rear Driver Side

2005-2011 Cadillac STS

Customer Questions & Expert Answers (12)
GM 25716669 Lower Control Arm, Rear Driver Side
  • Part Description
    Arm, Rear Axle Control Arm
  • Position
    Rear Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25716669
    Part DescriptionArm, Rear Axle Control Arm
    Other NamesControl Arm
    Item Dimensions22.5 x 18.0 x 6.1 inches
    Item Weight9.80 Pounds
    PositionRear Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU25716669
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25716669 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25716669 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done to the power steering gear for the 2008 Cadillac STS? Posted by Customer
    A:
    Raise the power steering gear for clearance and loosen its retaining bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How should the trailing link to knuckle bolt and nut be installed for the 2005 Cadillac STS? Posted by Customer
    A:
    Install the trailing link to knuckle bolt and nut, tightening the trailing link to frame nut to 150 Nm (111 ft. lbs.) and the trailing link to knuckle mounting bolt to 170 Nm (125 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What should be done after loosely installing the trailing link for the 2008 Cadillac STS? Posted by Customer
    A:
    Raise the frame with a suitable jack and install the front bolts to the frame, tightening them to 265 N.m (195 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What should be done to the power steering gear for the 2006 Cadillac STS? Posted by Customer
    A:
    Loosen the power steering gear retaining bolts and raise it for clearance.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What are the torque specifications for securing the lower control arm to cradle nuts for the 2010 Cadillac STS? Posted by Customer
    A:
    Secure the lower control arm to cradle nuts to 135 Nm (96 lb ft) and the power steering gear retaining bolts to 120 Nm (89 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done with the shock module yoke for the 2009 Cadillac STS? Posted by Customer
    A:
    Attach the shock module yoke to the lower control arm nut and tighten it to 180 Nm (133 lb ft), ensuring the ball stud does not rotate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the final step in the installation process for the 2006 Cadillac STS? Posted by Customer
    A:
    Tighten the new upper control arm to frame bolts and nuts to 150 Nm (111 ft. lbs.), reinstall the tire and wheel, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the trailing arm for the 2009 Cadillac STS? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    How do you install the new trailing link for the 2006 Cadillac STS? Posted by Customer
    A:
    Position the trailing link back into the vehicle, ensuring it is loosely installed before tightening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What should be done after reinstalling the ABS wire harness for the 2007 Cadillac STS? Posted by Customer
    A:
    Reinstall the stabilizer shaft link to the lower control arm and secure the stabilizer shaft link lower retaining nut to 110 N.m (81 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the trailing arm for the 2007 Cadillac STS? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25716669, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25716669 Lower Control Arm, Rear Driver Side. It is sometimes referred to as GM Control Arm, GM Trailing Arm. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25716669 Lower Control Arm, Rear Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery