Make sure this part fits

GM 25716670
Lower Control Arm, Rear Passenger Side

2005-2011 Cadillac STS

Customer Questions & Expert Answers (12)
GM 25716670 Lower Control Arm, Rear Passenger Side
  • Part Description
    Arm, Rear Axle Control Arm
  • Position
    Rear Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25716670
    Part DescriptionArm, Rear Axle Control Arm
    Other NamesControl Arm
    Item Dimensions22.7 x 17.7 x 6.1 inches
    Item Weight3.90 Pounds
    PositionRear Passenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU25716670
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25716670 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25716670 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after detaching the ABS wire harness for the 2010 Cadillac STS? Posted by Customer
    A:
    Remove the lower ball joint nut and use the J 43631 (Ball Joint Separator) to separate the ball joint stud from the steering knuckle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What needs to be removed after supporting the lower control arm for the 2005 Cadillac STS? Posted by Customer
    A:
    Remove the trailing link to knuckle nut and bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    How should the upper control arm to knuckle retaining nut be tightened for the 2006 Cadillac STS? Posted by Customer
    A:
    Tighten it to 20 Nm (15 ft. lbs.) plus an additional 210 degrees.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What are the torque specifications for the trailing link to frame nut and the trailing link to knuckle mounting bolt for the 2008 Cadillac STS? Posted by Customer
    A:
    Tighten the trailing link to frame nut to 150 N.m (111 lb ft) and the trailing link to knuckle mounting bolt to 170 N.m (125 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What should be done after removing the jack for the 2009 Cadillac STS? Posted by Customer
    A:
    Support the frame with a suitable jack and remove the front bolts from the frame to lower the front of the rear frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    How do you attach the shock module yoke for the 2008 Cadillac STS? Posted by Customer
    A:
    Attach the shock module yoke to the lower control arm nut and tighten to 180 N.m (133 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the lower control arm (AWD) for the 2007 Cadillac STS? Posted by Customer
    A:
    Begin by raising and supporting the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after removing the jack for the 2006 Cadillac STS? Posted by Customer
    A:
    Support the frame with a suitable jack and remove the front bolts from the frame to lower the front of the rear frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What is the next step after installing the front bolts for the 2007 Cadillac STS? Posted by Customer
    A:
    Remove the jack and support the lower control arm with a suitable jack for alignment of the trailing link and the knuckle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What is the next step after gaining clearance for the 2009 Cadillac STS? Posted by Customer
    A:
    Remove the lower control arm to cradle nuts and bolts, then take out the lower control arm from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be reattached to the lower control arm for the 2006 Cadillac STS? Posted by Customer
    A:
    The ABS wire harness.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25716670, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25716670 Lower Control Arm, Rear Passenger Side. It is sometimes referred to as GM Control Arm, GM Trailing Arm. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25716670 Lower Control Arm, Rear Passenger Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery