Make sure this part fits

GM 25716671
Trailing Arm, Rear Driver Side

2005-2011 Cadillac STS

Customer Questions & Expert Answers (12)
GM 25716671 Trailing Arm, Rear Driver Side
  • Part Description
    Arm, Rear Suspension Trailing
  • Position
    Rear Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25716671
    Part DescriptionArm, Rear Suspension Trailing
    Other NamesArm, Rear Axle Control Arm
    Item Dimensions24.9 x 4.6 x 4.4 inches
    Item Weight4.70 Pounds
    PositionRear Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU25716671
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25716671 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25716671 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be removed from the lower control arm for the 2006 Cadillac STS? Posted by Customer
    A:
    The ABS wire harness and the lower control arm to steering knuckle nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the torque specification for the lower control arm to cradle nuts for the 2007 Cadillac STS? Posted by Customer
    A:
    Tighten them to 135 N.m (96 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the final step in the process for the 2007 Cadillac STS? Posted by Customer
    A:
    Install the automatic level control link to the upper control arm, put the tire and wheel back on, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What should be done after loosely installing the fasteners for the 2006 Cadillac STS? Posted by Customer
    A:
    Install the upper control arm to frame mounting bolts and nuts, followed by connecting the upper control arm to the knuckle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What needs to be detached from the upper control arm for the 2008 Cadillac STS? Posted by Customer
    A:
    The automatic level control link.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What is the next step after lowering the front of the rear frame for the 2005 Cadillac STS? Posted by Customer
    A:
    Remove the trailing link to frame nut and bolt, and take the trailing link out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What is the first step to replace the lower control arm for the 2009 Cadillac STS? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you ensure the ball stud does not rotate during the process for the 2010 Cadillac STS? Posted by Customer
    A:
    Use hand tools to ensure the ball stud does not rotate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you detach the stabilizer shaft link for the 2008 Cadillac STS? Posted by Customer
    A:
    Detach the stabilizer shaft link lower nut and remove the link from the lower control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after raising the frame for the 2006 Cadillac STS? Posted by Customer
    A:
    Remove the jack and support the lower control arm with a suitable jack for alignment of the trailing link and knuckle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What is the first step in the installation process for the 2009 Cadillac STS? Posted by Customer
    A:
    Loosely install the trailing link to the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25716671, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25716671 Trailing Arm, Rear Driver Side. It is sometimes referred to as GM Control Arm, GM Trailing Arm. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25716671 Trailing Arm, Rear Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery