Make sure this part fits

GM 25716672
Trailing Arm, Rear Passenger Side

2005-2011 Cadillac STS

Customer Questions & Expert Answers (12)
GM 25716672 Trailing Arm, Rear Passenger Side
  • Part Description
    Arm, Rear Suspension Trailing
  • Position
    Rear Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25716672 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25716672 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be removed next after the tire and wheel for the 2006 Cadillac STS? Posted by Customer
    A:
    Remove the upper control arm to knuckle retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done before removing the rear lower control arm to frame retaining bolt for the 2007 Cadillac STS? Posted by Customer
    A:
    Raise the power steering gear to provide clearance.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done with the brake pipe bracket for the 2009 Cadillac STS? Posted by Customer
    A:
    Take off the brake pipe bracket retaining nuts and remove the bracket from the mounting studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    How should the lower control arm be supported for the 2008 Cadillac STS? Posted by Customer
    A:
    With a suitable jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What is the torque specification for the power steering gear retaining bolts for the 2009 Cadillac STS? Posted by Customer
    A:
    Tighten them to 120 Nm (89 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How should the lower control arm to steering knuckle nut be tightened for the 2006 Cadillac STS? Posted by Customer
    A:
    To 40 Nm (30 ft. lbs.) and then an additional 120 degrees.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What are the final steps after reinstallation for the 2008 Cadillac STS? Posted by Customer
    A:
    Reinstall the air deflector, tire and wheel, lower the vehicle, and check the front end alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the lower control arm for the 2010 Cadillac STS? Posted by Customer
    A:
    First, raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the next step after lowering the front of the rear frame for the 2007 Cadillac STS? Posted by Customer
    A:
    Remove the trailing link to frame nut and bolt, then take the trailing link out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What should be done after loosely installing the trailing link for the 2006 Cadillac STS? Posted by Customer
    A:
    Install the trailing link to frame bolt and nut, then raise the frame with a suitable jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What is the first step to replace the trailing arm for the 2005 Cadillac STS? Posted by Customer
    A:
    First, raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Trailing Arm, Rear Passenger Side 25716672 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25716672 Trailing Arm, Rear Passenger Side is available in the market under the name GM Control Arm, Trailing Arm. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25716672 Trailing Arm, Rear Passenger Side fits certain Cadillac STS models.
The original GM component designated by manufacturer part number 25716672 maintains top performance when functioning as the Arm, Rear Suspension Trailing unit at its Rear Passenger Side. The component 25716672 is constructed from durable material and its dimensions span 23.3 x 4.6 x 4.4 inches while weighing 4.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Arm, Rear Axle Control Arm. The part 25716672 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.