Make sure this part fits

GM 10308992
Upper Control Arm, Rear Passenger Side

2004-2013 GM

Customer Questions & Expert Answers (14)
GM 10308992 Upper Control Arm, Rear Passenger Side
GM 10308992 Upper Control Arm, Rear Passenger Side
  • Part Description
    Arm, Rear Axle Control Arm
  • Position
    Rear Passenger Side
  • Replaces
    10436131
  • Manufacturer
    General Motors
Make sure this part fits
$139.92 MSRP: $220.17
You Save: $80.25 (37%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac XLRBase, Platinum, V8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    2005-2013 Chevrolet Corvette427, Base, Grand Sport, ZR18 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10308992 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10308992 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for tightening the ball joint stud nut for the 2008 Cadillac XLR? Posted by Customer
    A:
    Tighten the ball joint stud nut to 30 N.m (22 lb ft) plus 195 degrees.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done to the lower control arm before loosening the upper ball joint stud nut for the 2004 Cadillac XLR? Posted by Customer
    A:
    Support the lower control arm with a jack stand.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What tool is used to remove the front transverse spring for the 2005 Cadillac XLR? Posted by Customer
    A:
    Use the Transverse Spring Remover (J 33432-A) to remove the front transverse spring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the rear axle upper control arm for the 2009 Cadillac XLR? Posted by Customer
    A:
    First raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the lower control arm for the 2009 Cadillac XLR? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you remove the front transverse spring for the 2007 Cadillac XLR? Posted by Customer
    A:
    Use the Transverse Spring Remover (J 33432-A).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the rear axle upper control arm for the 2007 Cadillac XLR? Posted by Customer
    A:
    Begin by raising and supporting the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What tool is used to separate the suspension knuckle from the upper control arm for the 2008 Chevrolet Corvette? Posted by Customer
    A:
    Use the Ball Joint Separator (J 42188).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be reconnected after the installation for the 2005 Chevrolet Corvette? Posted by Customer
    A:
    Reconnect the wheel speed sensor electrical connector and the electronic suspension control sensor link.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done with the upper control arm mounting bolts for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Install the upper control arm mounting bolts to the frame, tightening them to 110 N.m (81 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you remove the stabilizer shaft link from the lower control arm for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Use a back-up wrench to prevent the link stud from rotating.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after reconnecting the electrical connectors for the 2006 Chevrolet Corvette? Posted by Customer
    A:
    Remove the jack stand from the lower control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done to the upper ball joint stud nut for the 2010 Chevrolet Corvette? Posted by Customer
    A:
    Loosen it without removing it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Upper Control Arm, Rear Passenger Side 10308992 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10308992 Upper Control Arm, Rear Passenger Side is available in the market under the name GM Control Arm, Trailing Arm. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10308992 Upper Control Arm, Rear Passenger Side fits certain Chevrolet Corvette models, as well as Cadillac XLR models.
The original GM component designated by manufacturer part number 10308992 maintains top performance when functioning as the Arm, Rear Axle Control Arm unit at its Rear Passenger Side. The component 10308992 is constructed from durable material and its dimensions span 22.4 x 18.8 x 6.3 inches while weighing 3.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Control Arm. The part 10308992 has available replacement options 10436131. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.