Make sure this part fits

GM 12574287
Fuel Pressure Regulator

2000-2005 GM

Customer Questions & Expert Answers (4)
GM 12574287 Fuel Pressure Regulator
  • Part Description
    Regulator Kit-Fuel Pressure
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002 Chevrolet CavalierBase, LS, LS Sport4 Cyl 2.2 L GAS
    2004-2005 Chevrolet ClassicBase, LS4 Cyl 2.2 L GAS
    2002-2004 Oldsmobile AleroGL, GLS, GX4 Cyl 2.2 L GAS
    2002-2005 Pontiac Grand AmSE, SE14 Cyl 2.2 L GAS
    2002 Pontiac SunfireGT, SE4 Cyl 2.2 L GAS
    2001-2002 Saturn L100Base4 Cyl 2.2 L GAS
    2001-2003 Saturn L200Base4 Cyl 2.2 L GAS
    2004 Saturn L30014 Cyl 2.2 L GAS
    2000 Saturn LSBase4 Cyl 2.2 L GAS
    2000 Saturn LS1Base4 Cyl 2.2 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12574287 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12574287 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the fuel pressure regulator on Chevrolet Classic? Posted by Customer
    A:
    The first step to replace the Fuel Pressure Regulator requires relief of the fuel system pressure. The valve for vacuum pipe from the pressure regulator needs to be separated before setting a shop towel beneath it to absorb fuel leakage. Empty all retaining bolts before removing the Fuel Pressure Regulator while cleaning away any seal or seal material present on the Fuel Rail . Start by installing the small o-ring on the Fuel Rail and apply clean engine oil to it before its placement. The installation of the Fuel Pressure Regulator requires inserting the large o-ring into the Fuel Rail followed by gentle placement of the Fuel Pressure Regulator without disturbing its installed o-rings. Fasten the Fuel Pressure Regulator in position using its retaining bolts while keeping them tightened to 5 n.m (44 lb in). You should finish the installation by connecting the Fuel Pressure Regulator to its vacuum pipe and negative Battery Cable. Turn on ignition and turn off all power following two seconds on to perform a fuel leak inspection. Put the shop towel into an appropriate storage unit for keeping it.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for the pressure regulator attaching screw for the 2002 Chevrolet Cavalier? Posted by Customer
    A:
    Tighten it to 9.5 N.m (84 lb in) with the appropriate thread-locking material.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Pressure Regulator
    Q:
    How can you check for leaks after installation for the 2004 Chevrolet Classic? Posted by Customer
    A:
    Turn ON the ignition with the engine OFF for 2 seconds, then turn it OFF for 10 seconds, followed by turning it ON again to inspect for fuel leaks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Pressure Regulator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Fuel Pressure Regulator 12574287 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12574287 Fuel Pressure Regulator is available in the market under the name GM Fuel Pressure Regulator. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12574287 Fuel Pressure Regulator fits certain Chevrolet Classic, Cavalier models, as well as Pontiac Grand Am, Sunfire. Additionally, it is compatible with Oldsmobile Alero and Saturn L200, L300, L100 models.
The original GM component designated by manufacturer part number 12574287 maintains top performance when functioning as the Regulator Kit-Fuel Pressure unit. The component 12574287 is constructed from durable material and its dimensions span 4.0 x 3.1 x 2.1 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Regulator Kit, Fuel Injection. The part 12574287 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.