Make sure this part fits

GM 97240416
Push Rods

2001-2016 GM

Customer Questions & Expert Answers (11)
GM 97240416 Push Rods
GM 97240416 Push Rods
  • Part Description
    Rod, Valve Push; Pushrod
  • Replaces
    97367163
  • Manufacturer
    General Motors
Make sure this part fits
$11.93 MSRP: $16.33
You Save: $4.40 (27%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2016 Chevrolet Express 2500Base, LS, LT8 Cyl 6.6 L DIESEL
    2006-2016 Chevrolet Express 3500Base, LS, LT8 Cyl 6.6 L DIESEL
    2001-2016 Chevrolet Silverado 2500 HDBase, High Country, LS, LT, LTZ, WT8 Cyl 6.6 L DIESEL
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.6 L DIESEL
    2001-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.6 L DIESEL
    2007 Chevrolet Silverado 3500 ClassicLS, LT, WT8 Cyl 6.6 L DIESEL
    2007-2016 Chevrolet Silverado 3500 HDHigh Country, LT, LTZ, WT8 Cyl 6.6 L DIESEL
    2006-2016 GMC Savana 2500Base8 Cyl 6.6 L DIESEL
    2006-2016 GMC Savana 3500Base, LS, LT8 Cyl 6.6 L DIESEL
    2001-2016 GMC Sierra 2500 HDBase, Denali, SL, SLE, SLT, WT8 Cyl 6.6 L DIESEL
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Hey, is 97240416 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 97240416 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the procedure for installing the components after lubrication for the 2009 Chevrolet Express 2500? Posted by Customer
    A:
    Install the valve rocker arm pivot support, ensuring the pushrods seat properly in the valve lifter sockets, then install the pushrods, making sure they seat correctly in the rocker arms without tightening the rocker arm bolts yet.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pushrod
    Q:
    What is the procedure for installing the pushrods and rocker arms for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Install the valve rocker arm pivot support, ensuring the pushrods seat properly in the valve lifter sockets, then install the pushrods, making sure they seat correctly in the ends of the rocker arms without tightening the rocker arm bolts yet. Proceed to install the rocker arms and bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pushrod
    Q:
    How should the valve rocker arm pivot support be installed for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Install the valve rocker arm pivot support, ensuring the pushrods seat properly in the valve lifter sockets and at the ends of the rocker arms without tightening the rocker arm bolts yet.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pushrod
    Q:
    What is the first step to replace the valve rocker arm and push rod for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Begin by removing the rocker arm cover and placing the rocker arms, pushrods, and pivot support in a rack to maintain their original positions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pushrod
    Q:
    What is the torque specification for tightening the rocker arm bolts for cylinders 1, 2, 7, and 8 exhaust valves for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Tighten the rocker arm bolts to 30 Nm (22 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pushrod
    Q:
    How do you position the crankshaft for tightening the bolts for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Rotate the crankshaft until the number one piston is at top dead center (TDC) of the compression stroke, ensuring the cylinder number one rocker arms are off lobe lift and the crankshaft sprocket key is at the 1:30 position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pushrod
    Q:
    What is the torque specification for tightening the valve rocker arm nuts for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Tighten the nuts slowly to 35 Nm (26 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pushrod
    Q:
    How should the rocker arms and pushrods be prepared for installation for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Lubricate the rocker arms and pushrods with clean engine oil, and also lubricate the flange of the rocker arm bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pushrod
    Q:
    What is the next step after lubricating the components for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Install the rocker arm pivot support, ensuring the pushrods seat properly in the valve lifter sockets before installing the pushrods.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pushrod
    Q:
    What is the torque specification for tightening the valve rocker arm bolts for cylinders 1, 2, 7, and 8 exhaust for the 2007 GMC Savana 2500? Posted by Customer
    A:
    Tighten to 30 N.m (22 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pushrod
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Push Rods 97240416 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 97240416 Push Rods is available in the market under the name GM Pushrod. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 97240416 Push Rods fits certain Chevrolet Silverado 2500 HD, Express 2500, Express 3500 models, as well as GMC Sierra 2500 HD, Savana 2500, Savana 3500 models.
The original GM component designated by manufacturer part number 97240416 maintains top performance when functioning as the Rod, Valve Push; Pushrod unit. The component 97240416 is constructed from durable material and its dimensions span 12.1 x 8.4 x 1.1 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Rod, Engine Valve Push Rod; Rod, Engine Valve Push. The part 97240416 has available replacement options 97367163. Each vehicle needs 16 units of the part marked as SKU 97240416. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.