Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 10371100
Front Impact Sensor

2005-2007 GM

Customer Questions & Expert Answers (3)
GM 10371100 Front Impact Sensor
  • Part Description
    Sensor Assembly-Inflatable Restraint Front End Discriminating; Air Bag Sensor
  • Position
    Front
  • Replaces
    15102155
  • Manufacturer
    General Motors
Make sure this part fits
$187.63 MSRP: $280.52
You Save: $92.89 (34%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 10371100 Front Impact Sensor is Ref No. 5 in the diagram below

    2005 GMC Savana 1500 Front Impact Sensor Diagram for 10371100
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 10371100

  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number10371100
    Part DescriptionSensor Assembly-Inflatable Restraint Front End Discriminating; Air Bag Sensor
    Other NamesFront Sensor; Sensor, Inflatable Restraint System
    Item Dimensions3.2 x 2.1 x 2.2 inches
    Item Weight0.40 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15102155
    ManufacturerGeneral Motors
    SKU10371100
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2005-2006 Chevrolet Express 2500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2005-2007 GMC Savana 1500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2005-2006 GMC Savana 2500Base, SLE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL

  • Customer Questions & Expert Answers

    Q:
    Is this 10371100 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10371100 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front air bag sensor on Chevrolet Express 1500? Posted by Customer
    A:
    A technician must disable the SIR prior to replacing the inflatable restraint front end sensor. When applying power to prevent deployment or injury ensure that the sensor remains firmly installed and that you have avoided causing any strikes or jolts to the device. The first step to replace the sensor requires support of the vehicle while removing the Connector Position Assurance (CPA) from the electrical connector before disconnecting it. The mounting nut requires loosening so you can slide the sensor forward which allows you to take it out of the keyhole slot in the lower radiator support. Clean the mounting surface first before placing the sensor while pointing the arrow to the front direction. Begin by placing the sensor into the keyhole slot near the lower radiator support before pushing it gradually towards the vehicle's rear. Follow these installation steps: Secure the nut to 10 N.m (89 lb in) torque while connecting the electrical connector and installing the CPA. Afterward both safety stands should be removed while you lower the car to enable the SIR system.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front air bag sensor on Chevrolet Express 2500? Posted by Customer
    A:
    Safety begins by disabling the SIR system before a sensor replacement of the inflatable restraint front end. The sensor should not experience any striking or jolting movements during installation since this can activate the deployment or result in injury. After verifying that the sensor is safely attaining its position you should power on the device. The installation process begins with raising the vehicle then removing the Connector Position Assurance (CPa) from the electrical sensor connector before final connector separation. The sensor needs to be pulled forward by loosening the mounting nut before unlocking it from the keyhole slot that's embedded in the lower radiator support. When installing the sensor wash the mounting surface while directing the arrow to the front of the vehicle. Connect the sensor inside the lower radiator support keyhole slot by pushing it from front to back for appropriate seating. Press the nut down to 10 N.m (89 lb in) torque setting then connect both the electrical connector and reinstall the CPA. End with stand removal followed by lowering the car before activating the SIR system.
    Posted by ChevyPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 10371100, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 10371100 Front Impact Sensor. It is sometimes referred to as GM Air Bag Sensor. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 10371100 Front Impact Sensor. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery