Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 10368336
Side Impact Sensor

2005-2012 GM

Customer Questions & Expert Answers (11)
GM 10368336 Side Impact Sensor
  • Part Description
    Sensor, Inflatable Restraint System; Air Bag Sensor
  • Replaces
    15106279
  • Manufacturer
    General Motors
Make sure this part fits
$24.30 MSRP: $36.17
You Save: $11.87 (33%)
Ships in 1-3 Business Days
1
ADD TO CART

  • 10368336 Side Impact Sensor is Ref No. 6 in the diagram below

    2008 GMC Canyon Side Impact Sensor Diagram for 10368336
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 10368336

  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2012 Chevrolet ColoradoLS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2005-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 10368336 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10368336 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Air Bag Sensor in the Front End on Chevrolet Colorado? Posted by Customer
    A:
    Firstly, to replace the Inflatable Restraint Front End Sensor, it is first required to deactivate the SIR system. Next, remove the grille and loose the fasteners that hold the front discriminating sensors to the radiator support. Gently pull the sensor assembly from the radiator support and orient it for the purpose of locating the electrical connection. Remove the connector-position assurance from the connector of the sensor and disconnect that connector from the electrical sensor to remove the sensor from the car. For the installation, clean any dirt, grease or contaminants of the mounting areas and position the sensor close to the radiator support and connect the sensor electrical connector. Reinstall a CPA to the sensor electrical connector and connect the sensor assembly with the radiator support. Secure the discriminator sensor assembly, using the 95N fim Nm plugrattens. Tighten these bolt to 9 Nm (80 lb in). Lastly, reinstall the grille and enable the SIR system.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front air bag sensor on GMC Canyon? Posted by Customer
    A:
    To replace the inflatable restraint front end sensor, the first action to take before is the SIR system, for disabling. Do not hit or jolt the sensor, and have it well secured before applying power to prevent SIR deployment or personal injury. Start by dismantling the grille then loosen the fasteners attaching the front discriminating sensors to the radiator support and take out the sensor assembly. Place the sensor assembly so that it can reach the electrical connector, then remove the CPA and deconnect the sensor electrical connector before you remove the sensor from the vehicle. For installation, clear the mounting surfaces from dust, grease, or dirt, and then mount the sensor close to the radiator support and connect the sensor electrical connector. Mount the CPA onto the connector, mount the sensor assembly to the radiator support, and fasten it with the 2 fasteners. Tighten them up to 9 N.m (80 lb in). Lastly, reinstall the grille and turn on the SIR system.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for the fasteners retaining the discriminating sensor assembly for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Tighten the bolts to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Air Bag Sensor
    Q:
    What is the final step after securing the sensor assembly for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Reinstall the grille and enable the SIR system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Air Bag Sensor
    Q:
    What needs to be removed before disconnecting the sensor electrical connector for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Remove the connector-position assurance (CPA).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Air Bag Sensor
    Q:
    What should be done to access the side impact sensor for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Peel the rear half of the water deflector away from the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Air Bag Sensor
    Q:
    What is the torque specification for the screws retaining the side impact sensor for the 2008 GMC Canyon? Posted by Customer
    A:
    Tighten the screws to 9 N.m (79 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Air Bag Sensor
    Q:
    What is the final step in the replacement process for the 2010 GMC Canyon? Posted by Customer
    A:
    Reinstall the door trim panel and enable the SIR system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Air Bag Sensor
    Q:
    What should be checked before reinstalling the door trim panel for the 2005 GMC Canyon? Posted by Customer
    A:
    Ensure the water deflector is fully seated against the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Air Bag Sensor
    Q:
    What should be done after removing the sensor for the 2007 GMC Canyon? Posted by Customer
    A:
    Clean the mounting surface to eliminate any dirt or grease.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Air Bag Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Side Impact Sensor 10368336 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10368336 Side Impact Sensor is available in the market under the name GM Air Bag Sensor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10368336 Side Impact Sensor fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 10368336 maintains top performance when functioning as the Sensor, Inflatable Restraint System; Air Bag Sensor unit. The component 10368336 is constructed from durable material and its dimensions span 3.2 x 2.2 x 2.1 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Side Sensor. The part 10368336 has available replacement options 15106279. Each vehicle needs 2 units of the part marked as SKU 10368336. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.