Make sure this part fits

GM 12455804
Brake Shoes

1999-2013 GM

Customer Questions & Expert Answers (12)
GM 12455804 Brake Shoes
  • Part Description
    Shoe Kit, Brake; Parking Brake Shoe
  • Position
    Rear
  • Manufacturer
    General Motors
Make sure this part fits
$59.41 MSRP: $116.28
You Save: $56.87 (49%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac XLRBase, Platinum, V8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    1999-2013 Chevrolet Corvette427, 427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Z06, Z06 Carbon, ZR18 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12455804 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12455804 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to properly service and replace the Parking Brake Shoe on Cadillac XLR? Posted by Customer
    A:
    The first step to replace the Parking Brake Shoe requires removing both brake rotor and wheel bearing/hub. Starting by rotating the parking brake adjusting nut until all park brake shoe adjustment has been removed, you can remove the Parking Brake Shoe retaining spring. One must grasp the shoe and apply slight tension before pulling it from the actuator assembly. Installation requires the user to grasp the shoe and create slight spread before pulling it over the actuator assembly before installing the Parking Brake Shoe retaining spring. After the adjustment of Parking Brake Shoe-to-drum clearance the wheel bearing/hub must be installed followed by installing the brake rotor.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Parking Brake Shoe on Cadillac XLR? Posted by Customer
    A:
    You should begin Parking Brake Shoe replacement by performing rear brake rotor replacement and following it with rear wheel bearing and hub replacement. First adjust the parking brake adjusting nut until all park brake shoe adjustment is eliminated and then remove the Parking Brake Shoe retaining spring. After grasping the shoe and applying a small spread to it the assembly can be pulled from the actuator. When installing the brake shoe you should grasp it and slightly open the shoes before pulling them onto the actuator assembly before installing the retaining spring. Follow the first step of Parking Brake Shoe adjustment during wheel bearing/hub replacement (Rear Wheel Bearing and Hub Replacement) then end by putting on the brake rotor (Rear Brake Rotor Replacement).
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Parking Brake Shoe on Chevrolet Corvette? Posted by Customer
    A:
    The first step to replace parking brake shoes involves removing the brake rotor followed by taking out both the wheel bearing and hub. Use tongs to rotate the parking brake adjusting nut until all park brake shoe adjustment is removed. After that install the Parking Brake Shoe retaining spring. Using the shoe with gentle widening while pulling away from the actuator assembly allows the removal of the park brake shoe assembly. To install the new shoes start by grasping the assembly and slightly spreading it before pulling it over the actuator assembly before putting on the Parking Brake Shoe retaining spring. After Parking Brake Shoe adjustment proceed to install the wheel bearing/hub and finally install the brake rotor (JL9, J55, J56) and (J57).
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the second step after removing the brake rotor for the 2008 Cadillac XLR? Posted by Customer
    A:
    Take out the wheel bearing/hub.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Shoe
    Q:
    What are the final steps after adjusting the clearance for the 2007 Cadillac XLR? Posted by Customer
    A:
    Reinstall the wheel bearing/hub and the brake rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Shoe
    Q:
    What should be done after installing the park brake shoe assembly for the 2004 Chevrolet Corvette? Posted by Customer
    A:
    Install the parking brake shoe retaining spring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Shoe
    Q:
    What is the process for installing the park brake shoe for the 2006 Chevrolet Corvette? Posted by Customer
    A:
    Grasp the park brake shoe and spread it slightly while pulling it over the actuator assembly, then install the parking brake shoe retaining spring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Shoe
    Q:
    How can the park brake shoe assembly be removed for the 2001 Chevrolet Corvette? Posted by Customer
    A:
    Grasp the shoe and spread it slightly while pulling it from the actuator assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Shoe
    Q:
    What should be removed to access the parking brake shoe for the 2003 Chevrolet Corvette? Posted by Customer
    A:
    Remove the rear brake rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Shoe
    Q:
    What should be done after removing the brake rotor and wheel bearing/hub for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Rotate the parking brake adjusting nut to eliminate all park brake shoe adjustment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Shoe
    Q:
    What tools may be needed for this process for the 2000 Chevrolet Corvette? Posted by Customer
    A:
    Use the appropriate tools, including Brake Rotor Replacement (Rear), Wheel Bearing/Hub Replacement - Rear, and Park Brake Shoe Adjustment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Shoe
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Brake Shoes 12455804 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12455804 Brake Shoes is available in the market under the name GM Brake Shoe, Parking Brake Shoe. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12455804 Brake Shoes fits certain Chevrolet Corvette models, as well as Cadillac XLR models.
The original GM component designated by manufacturer part number 12455804 maintains top performance when functioning as the Shoe Kit, Brake; Parking Brake Shoe unit at its Rear. The component 12455804 is constructed from durable material and its dimensions span 9.1 x 9.0 x 1.8 inches while weighing 1.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Shoes. The part 12455804 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 12455804. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.