Make sure this part fits

GM 12494783
Shroud

2002-2005 GM

Customer Questions & Expert Answers (5)
GM 12494783 Shroud
  • Part Description
    Shroud Kit, Engine Electrical Coolant Fan; Fan Shroud
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    2002-2004 Buick RegalGS, LS6 Cyl 3.8 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12494783 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12494783 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the fan shroud on Buick Century? Posted by Customer
    A:
    The replacement process for the Fan Shroud begins with cooling fan removal and disconnecting the cooling fan wiring harness from each cooling Fan Motor. Start with harness removal of the electrical system from the Fan Shroud before removing the cooling Fan Blade fasteners and fan blades. The cooling fan motors bolts need to be unscrewed before the fan motors can be retrieved from their position inside the Fan Shroud. The installation process starts with placing cooling fan motors on the Fan Shroud before tightening their bolts to 6 nm (53 inch lbs.) according to the fastener notice. You need to change any bent or damaged Fan Blade because unbalanced blades could fail while operation to create a serious safety hazard. The installation process of fan blades starts with checking for damage and balance and continues with mounting the blades using cooling Fan Blade nuts which should reach 6 nm (53 inch lbs.) torque. The Fan Shroud receives the cooling fan electrical harness and the wiring harness attaches to every Fan Motor before reinstallation of the fans.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Ensure Proper Installation of the Fan Shroud on Buick Century? Posted by Customer
    A:
    Starting the Fan Shroud replacement process requires removing both cooling fans then separating the cooling fan wiring harness from each cooling Fan Motor. Unfasten the cooling fan electrical harness from within the Fan Shroud before removing the cooling Fan Blade nuts and the cooling fan blades respectively. You should unfasten the bolts securing the fan motors then pull them out from the fan housing. Remember that the installation starts by placing cooling fan motors onto the Fan Shroud followed by bolt tightening at 6 nm (53 inch lbs.) but make sure to replace all bent or damaged fan blades to ensure safety and proper balance. Secure the cooling fan blades on the Fan Shroud by screwing the blade nuts with torque to 6 nm (53 inch lbs.). The cooling fan process concludes with reattaching the electrical harness to the Fan Shroud before linking the harness to each cooling Fan Motor and reinstalling the devices.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after disconnecting the battery cable for the 2005 Buick Century? Posted by Customer
    A:
    Disconnect the cooling fan electrical connector and partially drain the cooling system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fan Shroud
    Q:
    How should the cooling fan blades be installed for the 2004 Buick Century? Posted by Customer
    A:
    Install the cooling fan blades and nuts, also tightened to 6 Nm (53 inch lbs.), followed by the cooling fan shroud and its clip at the top of the radiator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fan Shroud
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Shroud 12494783 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12494783 Shroud is available in the market under the name GM Fan Shroud. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12494783 Shroud fits certain Buick Regal, Century models.
The original GM component designated by manufacturer part number 12494783 maintains top performance when functioning as the Shroud Kit, Engine Electrical Coolant Fan; Fan Shroud unit. The component 12494783 is constructed from durable material and its dimensions span 37.3 x 22.1 x 5.7 inches while weighing 5.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Shroud Kit, Radiator Fan Shroud. The part 12494783 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.