Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15176756
Front Driver Speaker, Driver Side

1998-2005 GM

Customer Questions & Expert Answers (10)
GM 15176756 Front Driver Speaker, Driver Side
  • Part Description
    Speaker Assembly-Radio Front Side Door
  • Position
    Front Driver Side
  • Replaces
    15753499, 16246755
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 15176756 Front Driver Speaker, Driver Side is Ref No. 3 in the diagram below

    2001 GMC Sonoma Front Driver Speaker, Driver Side Diagram for 15176756
    The diagram listed above is for your reference. View diagram for your vehicle

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2005 Chevrolet BlazerBase, LS, Xtreme, ZR26 Cyl 4.3 L GAS
    2001-2004, 1998-1999 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    2001-2004, 1998-1999 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    2003-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15176756 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15176756 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to remove and install the front car speakers on Chevrolet S10? Posted by Customer
    A:
    The removal process for the front speaker begins by unscrewing two screws on the front grille speaker followed by removing the radio front speaker grille. Detach the DRL sensor from the right speaker grille through counterclockwise rotation by one quarter turn. You must first remove the radio front speaker screws and the radio front speaker from its location before disconnection of the electrical connector occurs. During installation reconnect the electrical connector first followed by radio front speaker assembly where the screws need to be tightened to 1.9 N.m (17 lb in). After reattaching the right speaker grille DRL sensor by turning it clockwise 1/4 turn, you can replace the radio front speaker grille while securing the grille screws at 1.9 N.m (17 lb in). Performance circuit operation needs to be inspected during the last stage of installation.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace Car Speakers in the Front on GMC Sonoma? Posted by Customer
    A:
    Begin by removing front speaker grille screws after which you must remove the radio front speaker grille. Start by carefully counterclockwise turning the DRL sensor 1/4 turn when the system is equipped and the sensor is located within the right speaker grille. First disconnect the electrical connector from the radio front speaker before removing both screws and the speaker itself. Establish the electrical connection after which install the radio front speaker by tightening its screws to 1.9 N.m (17 lb in). Slide the DRL sensor counterclockwise into the right speaker grille by a quarter-turn before reattaching the radio front speaker grille screws that need tightening to 1.9 N.m (17 lb in). The final step should include a check for correct electrical circuit operation.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the retaining rivets for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Disconnect the electrical connector and take out the radio rear speaker from the rear body side trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be done if the DRL sensor is equipped for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Take out the DRL sensor from the right speaker grille by turning it counterclockwise 1/4 turn.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the next step after disconnecting the electrical connectors for the 2002 Chevrolet S10? Posted by Customer
    A:
    Remove the radio rear speaker nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the final step after installing the speaker for the 2004 Chevrolet S10? Posted by Customer
    A:
    Reinstall the door trim panel and inspect for proper circuit operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step to service the rear door speaker for the 2002 Chevrolet S10? Posted by Customer
    A:
    Remove the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step in the installation process for the 2003 Chevrolet S10? Posted by Customer
    A:
    Connect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you install the new rear speaker for the 2003 GMC Sonoma? Posted by Customer
    A:
    Attach the radio rear speaker to the trim panel and secure it with the radio rear speaker nuts, tightening them to 1.2 N.m (11 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Front Driver Speaker, Driver Side 15176756 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15176756 Front Driver Speaker, Driver Side is available in the market under the name GM Car Speakers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15176756 Front Driver Speaker, Driver Side fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15176756 maintains top performance when functioning as the Speaker Assembly-Radio Front Side Door unit at its Front Driver Side. The component 15176756 is constructed from durable material and its dimensions span 12.4 x 9.9 x 5.4 inches while weighing 1.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Speaker, Radio Auxiliary Speakers. The part 15176756 has available replacement options 15753499, 16246755. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.