Make sure this part fits

GM 22625273
Stoplamp Switch

2002-2007 GM

Customer Questions & Expert Answers (5)
GM 22625273 Stoplamp Switch
GM 22625273 Stoplamp Switch
  • Part Description
    Switch, Stop Lamp Switch; Brake Light Switch
  • Manufacturer
    General Motors
Make sure this part fits
$24.98 MSRP: $39.10
You Save: $14.12 (37%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number22625273
    Part DescriptionSwitch, Stop Lamp Switch; Brake Light Switch
    Other NamesSwitch, Cruise Control
    Item Dimensions4.3 x 1.7 x 1.2 inches
    Item Weight0.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU22625273
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Chevrolet EquinoxLS, LT6 Cyl 3.4 L GAS
    2006-2007 Pontiac TorrentBase6 Cyl 3.4 L GAS
    2002-2007 Saturn VueBase, Green Line, Red Line4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22625273 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22625273 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Brake Light Switch on Chevrolet Equinox? Posted by Customer
    A:
    The replacing process for the cruise release switch starts with removing the instrument panel left lower closeout panel followed by disconnecting the cruise brake switch connector. The process begins with counterclockwise rotation of the cruise brake switch to separate it from the switch retainer. Depressing the Brake Pedal will make the operation easier. You should remove the cruise brake retainer from the Brake Pedal assembly while compressing its locking tabs carefully. Apply the retainer installation when placing the indexing arrow in the right direction with both retainer ears positioned at the back side of the bracket. Position the cruise brake switch retainer into the upper hole of the Brake Pedal assembly with the arrow pointing toward 3 o'clock but keep away from the Brake Pedal to prevent brake drag. Insert the cruise brake switch into the retainer until its plunger fully presses down while the electrical connector index notch points to 1 o'clock position before turning the switch clockwise to the travel stop at around 60 degrees. Evaluate the switch position by ensuring that it fits correctly with the electrical connector index at 3 o'clock. The installer should connect the cruise brake switch connector and replace the instrument panel left lower closeout panel before using a scan tool to check the cruise brake switch state in the Engine Control Module (ECM) general information data table for accurate applied and released readings while operating the Brake Pedal.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you disconnect the cruise brake switch for the 2006 Chevrolet Equinox? Posted by Customer
    A:
    Disconnect the cruise brake switch connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Light Switch
    Q:
    What should you do after installing the switch for the 2007 Chevrolet Equinox? Posted by Customer
    A:
    Connect the electrical connector to the stop lamp switch and inspect the stop lamps for proper operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Light Switch
    Q:
    What should you avoid doing during installation for the 2005 Chevrolet Equinox? Posted by Customer
    A:
    Take care not to depress the brake pedal during installation to avoid a brake drag condition.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Light Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 22625273, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 22625273 Stoplamp Switch. It is sometimes referred to as GM Brake Light Switch. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 22625273 Stoplamp Switch. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery