Make sure this part fits

GM 12594318
Oil Tube

2006-2011 GM

Customer Questions & Expert Answers (9)
GM 12594318 Oil Tube
  • Part Description
    Tube Assembly-Oil Level Indicator; Oil Dipstick Tube
  • Manufacturer
    General Motors
Make sure this part fits
$56.20 MSRP: $88.04
You Save: $31.84 (37%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Buick LucerneCXL, CXS, Super8 Cyl 4.6 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12594318 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12594318 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Service and Repair the Engine Oil Dipstick Tube on Buick Lucerne? Posted by Customer
    A:
    The repair procedure for engine oil dip stick and dip stick tube starts by removing the intake manifold cover and oil level indicator. You should start by loosening the oil level indicator tube nut before pulling upward to extract the oil level indicator tube. Begin by placing the lower o-ring seal correctly then apply clean engine oil to it for lubrication. The indicator tube bracket should go behind the tube nut followed by tube insertion into the engine block hole where you need to push it down completely. Fasten the oil level indicator tube nut as per the fastener notice requirements to a torque value of 19 n.m (14 lb ft).
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Dipstick Tube on Cadillac DTS? Posted by Customer
    A:
    The replacement of the oil level indicator tube begins with removing the front Engine Mount Bracket. Actions start with extracting the oil level indicator followed by nut loosening of the tube before the tube goes for removal. Clean engine oil must be used to lubricate the oil level indicator tube o-ring seal followed by placing the tube inside the lower crankcase opening. Attention needs to be given to fastening procedures in order to protect the vehicle from damage. Fasten the indicator tube to the tube nut with a tightness of 10 nm (89 lb in). You must reinstall the oil level indicator followed by the front Engine Mount Bracket.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the oil level indicator for the 2006 Buick Lucerne? Posted by Customer
    A:
    Loosen the oil level indicator tube nut and pull upward to remove the oil level indicator tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    What should be ensured during installation for the 2008 Buick Lucerne? Posted by Customer
    A:
    Ensure the lower O-ring seal is in place and lubricate it with clean engine oil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    What should be ensured during the installation of the oil level indicator tube for the 2010 Buick Lucerne? Posted by Customer
    A:
    Ensure to follow fastener caution guidelines to prevent vehicle damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    What is the next step after removing the oil level indicator for the 2007 Cadillac DTS? Posted by Customer
    A:
    Loosen the oil level indicator tube nut and remove the oil level indicator tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    What is the torque specification for tightening the tube nut for the 2006 Cadillac DTS? Posted by Customer
    A:
    Tighten it to 10 Nm (89 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    How should the oil level indicator tube O-ring seal be prepared for installation for the 2008 Cadillac DTS? Posted by Customer
    A:
    Lubricate the oil level indicator tube O-ring seal with clean engine oil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Oil Tube 12594318 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12594318 Oil Tube is available in the market under the name GM Dipstick Tube. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12594318 Oil Tube fits certain Cadillac DTS models, as well as Buick Lucerne models.
The original GM component designated by manufacturer part number 12594318 maintains top performance when functioning as the Tube Assembly-Oil Level Indicator; Oil Dipstick Tube unit. The component 12594318 is constructed from durable material and its dimensions span 21.3 x 10.4 x 5.1 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Tube, Engine Oil Level. The part 12594318 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.