Make sure this part fits

GM 15263851
Rear Weatherstrip

1997-2008 GM

Customer Questions & Expert Answers (16)
GM 15263851 Rear Weatherstrip
  • Part Description
    Sealing Strip, Rear Window Glass
  • Position
    Rear
  • Replaces
    10309492, 10401955, 10259215
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    1999-2005 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
    1997-1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15263851 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15263851 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after warming the body panel for the 2005 Buick Terraza? Posted by Customer
    A:
    Peel the backing from the front end of the sliding door auxiliary weatherstrip without touching the adhesive backing, then press the weatherstrip to the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the new sliding door window weatherstrip be installed for the 2006 Buick Terraza? Posted by Customer
    A:
    Install the new weatherstrip ensuring the joint is aligned at the center of the sliding door window latch attachment point, and roll the weatherstrip from the joint to the bottom of the window to ensure a proper seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the new weatherstrip be positioned on the pinch-weld flange for the 2006 Buick Terraza? Posted by Customer
    A:
    Align the locator dot to the upper front corner and upper rear corners, noting that the pink dot indicates a long wheel base and the yellow dot indicates a short wheel base.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2007 Buick Terraza? Posted by Customer
    A:
    Install the rear quarter window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the area of the hood outer seals be prepared for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Clean the old adhesive in the area using 3M(TM) P/N 8984 adhesive remover or an equivalent.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the rear quarter window for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Pull the rear quarter window weatherstrip from the pinch-weld flange and take it out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the correct way to install the remainder of the weatherstrip for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Roll it onto the flange as indicated by directional arrows, starting at the joint, and ensure the corners are fully seated without stretching the weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after heating the weatherstrip for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Carefully peel the weatherstrip from the panel surface with a flat-bladed tool, ensuring not to damage the paint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the body panel be prepared before installation for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Clean the body panel with oil-free naphtha or alcohol.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What needs to be done to the quarter window pinch-weld flange for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Clean all adhesive from the quarter window pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you note if installing a new weatherstrip for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    The new weatherstrip contains mastic/sealer/glue, so do not use additional weatherstrip adhesive.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the sealing strip at the bottom of the front door for the 2003 Chevrolet Venture? Posted by Customer
    A:
    First, open the front door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Install the rear quarter window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the weatherstrip be installed for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Ensure the joint is aligned with the center of the rear quarter window latch attachment point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be noted when installing the new weatherstrip for the 2002 Chevrolet Venture? Posted by Customer
    A:
    The new weatherstrip contains a mastic/sealer/glue, so do not use any additional adhesive.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Rear Weatherstrip 15263851 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15263851 Rear Weatherstrip is available in the market under the name GM Weather Strip, Door Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15263851 Rear Weatherstrip fits certain Chevrolet Uplander, Venture models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana, Trans Sport and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 15263851 maintains top performance when functioning as the Sealing Strip, Rear Window Glass unit at its Rear. The component 15263851 is constructed from durable material and its dimensions span 23.8 x 5.3 x 0.9 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Weatherstrip, Door Weatherstrip; Weatherstrip, Side Door Opening. The part 15263851 has available replacement options 10309492, 10401955, 10259215. Each vehicle needs 2 units of the part marked as SKU 15263851. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.