Make sure this part fits

GM 15290818
Surround Weatherstrip, Driver Side

2004-2012 GM

Customer Questions & Expert Answers (18)
GM 15290818 Surround Weatherstrip, Driver Side
GM 15290818 Surround Weatherstrip, Driver Side
  • Part Description
    Weatherstrip, Door Weatherstrip; Door Seal
  • Position
    Driver Side
  • Replaces
    93358277, 15840392
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15290818 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15290818 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the front door window weatherstrip for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Begin by removing the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be removed after the front door trim panel for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Next, take out the front door water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the upper molded detail from the front of the side access door for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Insert the J 38778 under the weatherstrip mold and release the three integral retaining pins on the mold to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear door auxiliary weatherstrip for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Open the front and side access doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the rear door outer auxiliary weatherstrip for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Pull it from the rear door pinchweld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2004 Chevrolet Colorado? Posted by Customer
    A:
    Finally, raise the rear door window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What tool is recommended for removing the weatherstrip for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Use the Door Trim Pad Clip Remover (J 38778) or an equivalent tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the upper molded detail for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Remove the lower molded detail from the front of the side access door using the same tool to release the one integral retaining pin.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new rear door opening weatherstrip for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Position the new rear door opening weatherstrip onto the pinchweld flange, starting at the upper rear corner, and press it onto the flange until fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after installing the new weatherstrip for the 2009 GMC Canyon? Posted by Customer
    A:
    Reinstall the lower center pillar panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you start replacing the auxiliary weatherstrip for the 2004 GMC Canyon? Posted by Customer
    A:
    First, open the front and rear doors as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after securing the weatherstrip for the 2010 GMC Canyon? Posted by Customer
    A:
    Close both the front and rear side access doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you release the weatherstrip from the door frame for the 2008 GMC Canyon? Posted by Customer
    A:
    Insert the tool under the weatherstrip and release the integral retainers from the door frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the process for installing the lower molded detail for the 2009 GMC Canyon? Posted by Customer
    A:
    Install it using the one integral retaining pin.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2006 GMC Canyon? Posted by Customer
    A:
    Finally, raise the rear door window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front door window glass weatherstrip for the 2005 GMC Canyon? Posted by Customer
    A:
    Begin by removing the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after installing the new weatherstrip for the 2007 GMC Canyon? Posted by Customer
    A:
    Close the front and side doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Surround Weatherstrip, Driver Side 15290818 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15290818 Surround Weatherstrip, Driver Side is available in the market under the name GM Weather Strip, Door Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15290818 Surround Weatherstrip, Driver Side fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 15290818 maintains top performance when functioning as the Weatherstrip, Door Weatherstrip; Door Seal unit at its Driver Side. The component 15290818 is constructed from durable material and its dimensions span 17.6 x 18.1 x 3.1 inches while weighing 1.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Weatherstrip, Side Door Opening; Weatherstrip. The part 15290818 has available replacement options 93358277, 15840392. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.