How to service the ignition coil on 2000 Buick Century?

Service the Ignition Coil by turning off the ignition and disconnecting Spark Plug Wires before documenting their starting positions. The procedure starts with removing two screws which attach the Ignition Coil to the Ignition Control Module before withdrawing the Ignition Coil from its position. Service the Ignition Coil by reinstalling the component into its position as you follow the fastener notice in service precautions. Apply 4-5 n.m (40 lb in) torque to the 2 attaching screws before restoring the spark plug wire connections.

OEM 2000 Buick Century Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2000 Buick Century Ignition Coil Part Number: 19418991
$52.41 MSRP: $107.70
You Save: $55.29 (52%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly, Ignition; Coil Assembly; Coil; Coil, Ignition Coil
- Replaces: 10472401, 10482928, 19353734
- Condition: New
- SKU: 19418991
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2000 Buick Century Submodels:
- Custom, Estate Wagon, Limited, Special, Special Edition, T-Type | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

2000 Buick Century Ignition Coil

With a comprehensive array of OEM 2000 Buick Century Ignition Coil, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick Century Ignition Coil are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Buick Century Ignition Coil Parts and Q&A

Q: How to service the ignition coil on 2000 Buick Century?
A: Service the Ignition Coil by turning off the ignition and disconnecting Spark Plug Wires before documenting their starting positions. The procedure starts with removing two screws which attach the Ignition Coil to the Ignition Control Module before withdrawing the Ignition Coil from its position. Service the Ignition Coil by reinstalling the component into its position as you follow the fastener notice in service precautions. Apply 4-5 n.m (40 lb in) torque to the 2 attaching screws before restoring the spark plug wire connections.