OEM 2000 Buick LeSabre Antenna Cable

2000 Buick LeSabre Antenna Cable Parts Questions & Experts Answers

• Q: How to remove and install the antenna cable on 2000 Buick LeSabre?

  A: Begin Antenna Cable removal by uninstalling the radio and right side windshield garnish molding and upper instrument panel trim pad along with the right rear upper quarter trim panel. The headliner needs to be lowered while disconnecting the antenna coaxial cable from its radio cavity position by pulling the connection upward through the retainer before removing its ductwork cable clip. Begin by taking off all remaining cable clips from the instrument panel support while detaching coaxial cable connectors and coaxial cable from the antenna module positioned on the rear roof beam. The installation process starts with disconnecting three important components: the roof beam ground cable, the antenna connection at the windshield, and the power lead connection. Finish the installation by removing rosebud clips on roof beams followed by extracting the coaxial cable harness from the vehicle. The installation starts with roof beam rosebud clip attachment to the coaxial cable harness before power lead connectors connection and antenna connection at the windshield installation. The vehicle's antenna module must receive coaxial cable connections with ordered connector installation to the roof beam. Cable clips must be installed onto instrument panel support before you place the cable connector into the radio cavity retainer. Finally attach the cable clip to ductwork. End the installation process with the upper instrument panel trim pad, radio feature, headliner system, upper rear quarter trim panel addition, also right side windshield garnish molding installation.