How to service and repair the control arm bushing on 2000 Buick Park Avenue?

The control arm bushing can be serviced and repaired by taking the control arm out of the car. Thread Lubricate the threads with Long Bolt with Thrust Bearing. Install the Bushing Remover and screw until the bushing drives out. To install: make sure that the bushing is installed properly and repeat the installation to fit the bushing completely. Lastly, re install the control arm.

OEM 2000 Buick Park Avenue Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Control Arm Bushing found

View related parts
2000 Buick Park Avenue Control Arm Bushing, Rear Part Number: 25557622
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Suspension Control Arm Bushing; Axle Support Bushing; Axle Beam Mount; Lower Control Arm Bushing; Bushings
- Position: Rear
- Item Weight: 0.90 Pounds
- Condition: New
- SKU: 25557622
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2000 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2000 Buick Park Avenue Control Arm Bushing

With a comprehensive array of OEM 2000 Buick Park Avenue Control Arm Bushing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick Park Avenue Control Arm Bushing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Buick Park Avenue Control Arm Bushing Parts and Q&A

Q: How to service and repair the control arm bushing on 2000 Buick Park Avenue?
A: The control arm bushing can be serviced and repaired by taking the control arm out of the car. Thread Lubricate the threads with Long Bolt with Thrust Bearing. Install the Bushing Remover and screw until the bushing drives out. To install: make sure that the bushing is installed properly and repeat the installation to fit the bushing completely. Lastly, re install the control arm.