How to service the rear wheel bearing and hub on 2000 Buick Park Avenue?

Raise the vehicle and remove both wheel and tire to handle the rear Wheel Bearing and hub. Unplug the brake rotor and disconnect the ABS Sensor wire connection. Unbolt the Control Arm four times before you pull the hub and bearing assembly and also the brake shield. You must properly clean both the Control Arm block and hole before starting installation steps. Place the brake shield, hub and bearing onto the Control Arm unit by hand, then tighten the four bolts to assemble them without causing harm. Connect back the ABS Sensor afterwards. Screw the hub and bearing bolts to 70 newton meters (52 foot-pounds). First put the brake rotor into position. Afterwards put on the wheel and tire and tighten wheel nuts to 140n m (100 ft. Lbs.). Finally, lower the vehicle.

OEM 2000 Buick Park Avenue Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheel Bearings found

View related parts
2000 Buick Park Avenue Hub Assembly, Front
Part Number: 12429204
$217.28 MSRP: $425.44
You Save: $208.16 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hub Kit, Front Wheel; Wheel Bearing & Hub Assembly; Disc Brake Hardware Kit; Wheel Hub Repair Kit; Axle Bearing.; Front Hub & Bearing; Front Hub; Hub & Bearing; Hub Kit, Rear Wheel
- Position: Front
- Replaced by: 19433930
- Item Weight: 12.00 Pounds
- Item Dimensions: 7.0 x 7.0 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 12429204
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2000 Buick Park Avenue Hub Assembly, Rear
Part Number: 7470555
Product Specifications
- Other Name: Hub, Rear Wheel (W/Wheel Speed Sensor); Wheel Bearing & Hub Assembly; Axle Bearing.; Rear Hub & Bearing Assembly; Hub & Bearing; Hub & Bearing Assembly; Rotor Hub & Bearing; Hub; Hub, Rear Wheel
- Position: Rear
- Item Weight: 8.90 Pounds
- Item Dimensions: 7.2 x 6.8 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7470555
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2000 Buick Park Avenue Wheel Bearing

With a comprehensive array of OEM 2000 Buick Park Avenue Wheel Bearing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick Park Avenue Wheel Bearing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Buick Park Avenue Wheel Bearing Parts Questions & Experts Answers

Q: How to service the rear wheel bearing and hub on 2000 Buick Park Avenue?
A: Raise the vehicle and remove both wheel and tire to handle the rear Wheel Bearing and hub. Unplug the brake rotor and disconnect the ABS Sensor wire connection. Unbolt the Control Arm four times before you pull the hub and bearing assembly and also the brake shield. You must properly clean both the Control Arm block and hole before starting installation steps. Place the brake shield, hub and bearing onto the Control Arm unit by hand, then tighten the four bolts to assemble them without causing harm. Connect back the ABS Sensor afterwards. Screw the hub and bearing bolts to 70 newton meters (52 foot-pounds). First put the brake rotor into position. Afterwards put on the wheel and tire and tighten wheel nuts to 140n m (100 ft. Lbs.). Finally, lower the vehicle.