How to replace the rear door power window switch on 2000 Buick Regal?

A successful replacement of the rear door Power Window Switch demands that drivers turn their Ignition Switch to off to protect against switch shorting while operating. A slip-resistant coating should cover the area where you will insert the flat tool to prevent damage to the inner door panel. Start by using a plastic flat-bladed tool to push down on the switch bezel retainers located at the bottom of the switch bezel. You must disconnect the electrical connector from the Power Window Switch before extracting the switch from the bezel from inside the door. To install switch tabs must go into bezel slots where the tabs need forceful pressure to make the switch secure. Start by connecting the electrical connector to the window switch followed by lining up the bezel to the door trim panel opening and pushing it to achieve proper installation.

OEM 2000 Buick Regal Power Window Switch

Electric Window Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Power Window Switches found

View related parts
2000 Buick Regal Window Switch, Driver Side
Part Number: 19329001
$86.25 MSRP: $127.79
You Save: $41.54 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Side Window; Switch, Door Window
- Position: Driver Side
- Replaces: 10295797, 10433029, 19244641
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.1 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19329001
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Regal Submodels:
- 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
2000 Buick Regal Window Switch
Part Number: 10256582
$46.31 MSRP: $58.97
You Save: $12.66 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Door Window; Door Window Switch
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.1 x 2.0 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10256582
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Regal Submodels:
- 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
2000 Buick Regal Window Switch, Passenger Side
Part Number: 10256580
Product Specifications
- Other Name: Switch, Door Window
- Position: Passenger Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.4 x 2.1 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10256580
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Regal Submodels:
- 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS

2000 Buick Regal Power Window Switch

With a comprehensive array of OEM 2000 Buick Regal Power Window Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick Regal Power Window Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Buick Regal Parts Questions & Experts Answers

Q: How to replace the rear door power window switch on 2000 Buick Regal?
A: A successful replacement of the rear door Power Window Switch demands that drivers turn their Ignition Switch to off to protect against switch shorting while operating. A slip-resistant coating should cover the area where you will insert the flat tool to prevent damage to the inner door panel. Start by using a plastic flat-bladed tool to push down on the switch bezel retainers located at the bottom of the switch bezel. You must disconnect the electrical connector from the Power Window Switch before extracting the switch from the bezel from inside the door. To install switch tabs must go into bezel slots where the tabs need forceful pressure to make the switch secure. Start by connecting the electrical connector to the window switch followed by lining up the bezel to the door trim panel opening and pushing it to achieve proper installation.