How to Service and Repair Canister Purge Valves on 2000 Cadillac Seville?

To maintain the Canister Purge Valves, remove the engine sight shield and the EVAP purge solenoid electrical connector and electrical hose. Take out the solenoid, take off the old O-ring and put a new one in. Install the hoses/electrical connector, and re-fit the engine sight shield.

OEM 2000 Cadillac Seville Canister Purge Valves

Fuel Tank Evaporator Purge Control Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valves found

View related parts
2000 Cadillac Seville Purge Valve Part Number: 1997279
$40.09 MSRP: $74.80
You Save: $34.71 (47%)
ADD TO CART
Product Specifications
- Other Name: Valve, Evaporator Emission Canister Purge Solenoid; Vapor Canister Purge and Vent Solenoid.; Purge Solenoid; Purge Control Valve; Valve, Fuel Tank Evaporator/Purge Control
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.6 x 2.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1997279
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS

2000 Cadillac Seville Canister Purge Valves

With a comprehensive array of OEM 2000 Cadillac Seville Canister Purge Valves, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Cadillac Seville Canister Purge Valves are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Cadillac Seville Canister Purge Valves Parts and Q&A

Q: How to Service and Repair Canister Purge Valves on 2000 Cadillac Seville?
A: To maintain the Canister Purge Valves, remove the engine sight shield and the EVAP purge solenoid electrical connector and electrical hose. Take out the solenoid, take off the old O-ring and put a new one in. Install the hoses/electrical connector, and re-fit the engine sight shield.