OEM 2000 Chevrolet Corvette Seat Switch

2000 Chevrolet Corvette Seat Switch Parts Questions & Experts Answers

• Q: How to replace the power seat switch on 2000 Chevrolet Corvette?

  A: The process starts with unplugging the seat back recliner handle from its shaft after pushing down the handle retaining spring clip with a suitable tool between the seat cushion and the handle. The seat frame requires the removal of its side trim panel screws before rocking the panel while side-to-side until the barrel post clip works loose. Finally, reposition the panel away from the seat. Remove the switch after disconnecting its harness. The installation process requires the new switch placement on the side trim panel and the application of a new barrel clip to the trim panel upper barrel post. Connect the switch harness before installing the seat side trim panel where you must carefully insert the barrel post with clip through the seat cover hole into the seat frame before screwing at the front and rear panel points. To complete the installation snap the reclining mechanism shaft into the handle retaining spring clip that must be positioned in its locking position.