How should gas charged shock absorbers (FE1 and FE3 (Without Sensor)) be disposed of safely on 2000 Chevrolet Corvette?

The process of disposing gas-charged shock absorbers (FE1 and FE3 (Without Sensor)) starts with eye protection when working to maintain safety and ends with not removing the snap ring inside the tube to avoid gas pressure injuries. Drive a centerpunched 40 mm (1.6 inch) notch along the bottom shock tube edge before starting. Place the shock absorber horizontally into a clamping device while keeping it extended to the maximum position. Drill a 5 mm (3/16 inch) hole through the centerpunch mark with adequate shop towels in place to catch escaping oil or gas mixture. The creation of this second indentation required a centerpunch followed by drilling a hole using the same drill bit in the middle of the tube. Shop towels were employed to manage the escaping oil during this process. Use the vise to extend the shock absorber horizontally before positioning the hole at the bottom. Then operate the rod in and out to remove all oil from the tube.

OEM 2000 Chevrolet Corvette Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Shock Absorbers found

View related parts
2000 Chevrolet Corvette Shock Absorber
Part Number: 10431991
$190.05 MSRP: $340.90
You Save: $150.85 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Shock Absorber; Shock; Absorber, Shock
- Position: Rear
- Replaces: 10280671, 10416668
- Item Weight: 5.40 Pounds
- Item Dimensions: 8.2 x 4.0 x 23.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10431991
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2000 Chevrolet Corvette Shock Absorber
Part Number: 10431989
$188.70 MSRP: $338.48
You Save: $149.78 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Shock; Suspension Shock Absorber; Shock
- Position: Front
- Item Weight: 3.60 Pounds
- Item Dimensions: 24.9 x 5.1 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10431989
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2000 Chevrolet Corvette Shock Absorber, Passenger Side
Part Number: 22064826
Product Specifications
- Other Name: Absorber, Shock; Shock
- Position: Passenger Side
- Replaces: 22064813
- Item Weight: 9.90 Pounds
- Item Dimensions: 8.3 x 8.3 x 20.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22064826
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Corvette Submodels:
- Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2000 Chevrolet Corvette Shock Absorber, Passenger Side
Part Number: 22064828
Product Specifications
- Other Name: Absorber, Shock; Shock
- Position: Passenger Side
- Replaces: 22064815
- Item Weight: 7.90 Pounds
- Item Dimensions: 19.5 x 8.0 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22064828
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Corvette Submodels:
- Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2000 Chevrolet Corvette Shock Absorber, Driver Side
Part Number: 22064827
Product Specifications
- Other Name: Absorber, Shock; Shock
- Position: Driver Side
- Replaces: 22064814
- Item Weight: 8.60 Pounds
- Item Dimensions: 8.2 x 8.2 x 19.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22064827
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Corvette Submodels:
- Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2000 Chevrolet Corvette Shock Absorber, Driver Side
Part Number: 22064825
Product Specifications
- Other Name: Absorber, Shock; Shock
- Position: Driver Side
- Replaces: 22064812
- Item Weight: 4.80 Pounds
- Item Dimensions: 19.9 x 8.2 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22064825
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Corvette Submodels:
- Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2000 Chevrolet Corvette Shock Absorber
Part Number: 10431992
Product Specifications
- Other Name: Suspension Shock Absorber; Shock; Absorber, Shock
- Position: Rear
- Replaces: 10280672, 10416669
- Item Weight: 3.30 Pounds
- Item Dimensions: 6.3 x 6.2 x 22.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10431992
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2000 Chevrolet Corvette Shock Absorber
Part Number: 10431990
Product Specifications
- Other Name: Absorber, Shock; Suspension Shock Absorber; Shock
- Position: Front
- Item Weight: 3.80 Pounds
- Item Dimensions: 23.1 x 8.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10431990
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS

2000 Chevrolet Corvette Shock Absorber

With a comprehensive array of OEM 2000 Chevrolet Corvette Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Corvette Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Corvette Shock Absorber Parts Questions & Experts Answers

Q: How should gas charged shock absorbers (FE1 and FE3 (Without Sensor)) be disposed of safely on 2000 Chevrolet Corvette?
A: The process of disposing gas-charged shock absorbers (FE1 and FE3 (Without Sensor)) starts with eye protection when working to maintain safety and ends with not removing the snap ring inside the tube to avoid gas pressure injuries. Drive a centerpunched 40 mm (1.6 inch) notch along the bottom shock tube edge before starting. Place the shock absorber horizontally into a clamping device while keeping it extended to the maximum position. Drill a 5 mm (3/16 inch) hole through the centerpunch mark with adequate shop towels in place to catch escaping oil or gas mixture. The creation of this second indentation required a centerpunch followed by drilling a hole using the same drill bit in the middle of the tube. Shop towels were employed to manage the escaping oil during this process. Use the vise to extend the shock absorber horizontally before positioning the hole at the bottom. Then operate the rod in and out to remove all oil from the tube.

Related 2000 Chevrolet Corvette Parts

Alternate Year Models

1999 Chevrolet Corvette Shock Absorber 2001 Chevrolet Corvette Shock Absorber