How to Replace a Shock Absorber Using the Required Tools on 2001 Chevrolet Corvette?

First, support the vehicle at a suitable height and eliminate the tire and wheel from the car. Remove the real-time damping electrical connector from the shock if present before taking out the upper mounting nut along with insulator retainer and insulator components. The procedure starts with removing the shock absorber lower mounting bolts and nuts followed by unmounting it from both the upper shock tower and the vehicle. Heavy-duty shock-equipped vehicles (FE3) need a pry bar and Shock Support Tool (J 43822) to compress the shock absorber from below while installing the tool on the compressed height before shock absorber removal from the shock tower and vehicle. Mount the retainer along with insulator to the shock absorber before positioning it into the upper shock tower where the upper mounting nut should be tightened to 26 Nm (19 ft. lbs.). Fits the lower mounting bolts followed by tightening them to 28 Nm (21 ft. lbs.). Also reconnect the real-time damping electrical connector when at hand. After removing the Transverse Spring Compressor (J 33432-A) use it to install the tire together with the wheel assembly and then lower the vehicle. Heavy-duty shock absorbers benefit from using a Shock Support Tool (J 43822) to install the shock absorber into the vehicle after which the mounting nuts for the upper and lower section should be torqued. Once the work is complete the support tool and Transverse Spring Compressor (J 33432-A) must be removed before finalizing tire and wheel assembly and vehicle lowering.

OEM 2001 Chevrolet Corvette Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Shock Absorbers found

View related parts
2001 Chevrolet Corvette Shock Absorber Part Number: 10431991
$179.16 MSRP: $347.72
You Save: $168.56 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Shock Absorber; Shock; Absorber, Shock
- Position: Rear
- Replaces: 10280671, 10416668
- Item Weight: 5.40 Pounds
- Item Dimensions: 8.2 x 4.0 x 23.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10431991
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2001 Chevrolet Corvette Shock Absorber Part Number: 10431989
$176.33 MSRP: $345.24
You Save: $168.91 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Shock; Suspension Shock Absorber; Shock
- Position: Front
- Item Weight: 3.60 Pounds
- Item Dimensions: 24.9 x 5.1 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10431989
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2001 Chevrolet Corvette Shock Absorber, Passenger Side Part Number: 22064826
Product Specifications
- Other Name: Absorber, Shock; Shock
- Position: Passenger Side
- Replaces: 22064813
- Item Weight: 9.90 Pounds
- Item Dimensions: 8.3 x 8.3 x 20.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22064826
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Corvette Submodels:
- Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2001 Chevrolet Corvette Shock Absorber, Passenger Side Part Number: 22064828
Product Specifications
- Other Name: Absorber, Shock; Shock
- Position: Passenger Side
- Replaces: 22064815
- Item Weight: 7.90 Pounds
- Item Dimensions: 19.5 x 8.0 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22064828
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Corvette Submodels:
- Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2001 Chevrolet Corvette Shock Absorber, Driver Side Part Number: 22064827
Product Specifications
- Other Name: Absorber, Shock; Shock
- Position: Driver Side
- Replaces: 22064814
- Item Weight: 8.60 Pounds
- Item Dimensions: 8.2 x 8.2 x 19.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22064827
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Corvette Submodels:
- Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2001 Chevrolet Corvette Shock Absorber, Driver Side Part Number: 22064825
Product Specifications
- Other Name: Absorber, Shock; Shock
- Position: Driver Side
- Replaces: 22064812
- Item Weight: 4.80 Pounds
- Item Dimensions: 19.9 x 8.2 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22064825
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Corvette Submodels:
- Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2001 Chevrolet Corvette Shock Absorber Part Number: 10431992
Product Specifications
- Other Name: Suspension Shock Absorber; Shock; Absorber, Shock
- Position: Rear
- Replaces: 10280672, 10416669
- Item Weight: 3.30 Pounds
- Item Dimensions: 6.3 x 6.2 x 22.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10431992
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2001 Chevrolet Corvette Shock Absorber Part Number: 10419093
Product Specifications
- Other Name: Absorber, Shock; Suspension Shock Absorber; Shock
- Position: Front
- Item Weight: 3.90 Pounds
- Item Dimensions: 23.5 x 8.1 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10419093
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Z06 | 8 Cyl 5.7 L GAS
View related parts
2001 Chevrolet Corvette Shock Absorber Part Number: 10431990
Product Specifications
- Other Name: Absorber, Shock; Suspension Shock Absorber; Shock
- Position: Front
- Item Weight: 3.80 Pounds
- Item Dimensions: 23.1 x 8.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10431990
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS

2001 Chevrolet Corvette Shock Absorber

With a comprehensive array of OEM 2001 Chevrolet Corvette Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Corvette Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Corvette Shock Absorber Parts and Q&A

Q: How to Replace a Shock Absorber Using the Required Tools on 2001 Chevrolet Corvette?
A: First, support the vehicle at a suitable height and eliminate the tire and wheel from the car. Remove the real-time damping electrical connector from the shock if present before taking out the upper mounting nut along with insulator retainer and insulator components. The procedure starts with removing the shock absorber lower mounting bolts and nuts followed by unmounting it from both the upper shock tower and the vehicle. Heavy-duty shock-equipped vehicles (FE3) need a pry bar and Shock Support Tool (J 43822) to compress the shock absorber from below while installing the tool on the compressed height before shock absorber removal from the shock tower and vehicle. Mount the retainer along with insulator to the shock absorber before positioning it into the upper shock tower where the upper mounting nut should be tightened to 26 Nm (19 ft. lbs.). Fits the lower mounting bolts followed by tightening them to 28 Nm (21 ft. lbs.). Also reconnect the real-time damping electrical connector when at hand. After removing the Transverse Spring Compressor (J 33432-A) use it to install the tire together with the wheel assembly and then lower the vehicle. Heavy-duty shock absorbers benefit from using a Shock Support Tool (J 43822) to install the shock absorber into the vehicle after which the mounting nuts for the upper and lower section should be torqued. Once the work is complete the support tool and Transverse Spring Compressor (J 33432-A) must be removed before finalizing tire and wheel assembly and vehicle lowering.