How to install the steering knuckle on 2000 Chevrolet Corvette?

To install the Steering Knuckle, place it on the top Control Arm and the bottom Control Arm. Once the jackstand is removed, fasten the steering linkage outer tie rod ball stud to the Steering Knuckle while using the fastener notice in service precautions. Then, install stabilizer shaft link to the lower Control Arm and tighten stabilizer shaft link nut to 72 nm (53 ft. Lbs.). Connect the electrical connector of wheel speed sensor, then insert brake rotor and caliper. After that, install the tire and wheel assembly, lower the vehicle, and adjust the front wheel toe where needed.

OEM 2000 Chevrolet Corvette Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

View related parts
2000 Chevrolet Corvette Knuckle
Part Number: 10332529
$298.10 MSRP: $469.04
You Save: $170.94 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering; Knuckle, Rear Wheel
- Replaces: 10237238
- Item Weight: 6.70 Pounds
- Item Dimensions: 17.2 x 16.8 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10332529
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2000 Chevrolet Corvette Knuckle, Rear
Part Number: 10332530
$252.21 MSRP: $396.84
You Save: $144.63 (37%)
Product Specifications
- Other Name: Knuckle, Rear Wheel; Knuckle, Steering
- Position: Rear
- Replaces: 10237239
- Item Weight: 5.60 Pounds
- Item Dimensions: 14.4 x 11.2 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10332530
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS

2000 Chevrolet Corvette Steering Knuckle

With a comprehensive array of OEM 2000 Chevrolet Corvette Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Corvette Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Corvette Parts Questions & Experts Answers

Q: How to install the steering knuckle on 2000 Chevrolet Corvette?
A: To install the Steering Knuckle, place it on the top Control Arm and the bottom Control Arm. Once the jackstand is removed, fasten the steering linkage outer tie rod ball stud to the Steering Knuckle while using the fastener notice in service precautions. Then, install stabilizer shaft link to the lower Control Arm and tighten stabilizer shaft link nut to 72 nm (53 ft. Lbs.). Connect the electrical connector of wheel speed sensor, then insert brake rotor and caliper. After that, install the tire and wheel assembly, lower the vehicle, and adjust the front wheel toe where needed.