How to replace the automatic Motor and Transmission Mount on 2000 Chevrolet Impala?

Start by elevating your vehicle to a stable position and then proceed to remove the parking brake cable then disconnect the left inner splash shield and finally the left tire assembly. Set up a transmission jack under the transaxle to remove the transaxle mount upper nuts which secure the transaxle bracket. Begin by lifting the transaxle assembly but with care before removing the transaxle mount lower nuts (Nuts) from the frame to extract the transaxle mount off the frame. Place the transaxle mount onto its designated frame position before installing the lower frame nuts (Nuts) and torquing them to 63 nm (46 ft. Lbs.). Position the transaxle to lock the mount studs into the transaxle bracket before tightening the mount upper nuts (Nuts) to the mount at 47 nm (35 ft. Lbs.). Complete the installation by taking away the transmission jack from the transaxle and reinstall the left inner splash shield and put back the left wheel with its tire. Lower the vehicle to its resting position.

OEM 2000 Chevrolet Impala Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Motor And Transmission Mounts found

View related parts
2000 Chevrolet Impala Transmission Mount Part Number: 22146688
$55.65 MSRP: $94.75
You Save: $39.10 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Transfer Case Mount
- Item Weight: 1.80 Pounds
- Item Dimensions: 5.6 x 5.5 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22146688
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LT | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
2000 Chevrolet Impala Motor Mount Part Number: 10448575
$69.62 MSRP: $118.53
You Save: $48.91 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Spring Insulator; Lower Mount; Mount Insulator; Mount; Mount, Engine Mounting; Engine Mount
- Replaces: 17998813, 22113282, 22178657, 22146018, 22175206, 10340740, 10448574, 10448576, 22146466
- Item Weight: 4.20 Pounds
- Item Dimensions: 11.6 x 5.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10448575
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2000 Chevrolet Impala Transmission Mount, Orange Part Number: 22146834
$102.92 MSRP: $175.23
You Save: $72.31 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Transmission *Orange; Transfer Case Mount; Mount, Transmission Mounting
- Replaces: 22178939, 22173073
- Item Weight: 2.30 Pounds
- Item Dimensions: 7.1 x 6.4 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22146834
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2000 Chevrolet Impala Motor And Transmission Mount

With a comprehensive array of OEM 2000 Chevrolet Impala Motor And Transmission Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Impala Motor And Transmission Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Impala Motor And Transmission Mount Parts and Q&A

Q: How to replace the automatic Motor and Transmission Mount on 2000 Chevrolet Impala?
A: Start by elevating your vehicle to a stable position and then proceed to remove the parking brake cable then disconnect the left inner splash shield and finally the left tire assembly. Set up a transmission jack under the transaxle to remove the transaxle mount upper nuts which secure the transaxle bracket. Begin by lifting the transaxle assembly but with care before removing the transaxle mount lower nuts (Nuts) from the frame to extract the transaxle mount off the frame. Place the transaxle mount onto its designated frame position before installing the lower frame nuts (Nuts) and torquing them to 63 nm (46 ft. Lbs.). Position the transaxle to lock the mount studs into the transaxle bracket before tightening the mount upper nuts (Nuts) to the mount at 47 nm (35 ft. Lbs.). Complete the installation by taking away the transmission jack from the transaxle and reinstall the left inner splash shield and put back the left wheel with its tire. Lower the vehicle to its resting position.