OEM 2000 Chevrolet Prizm A/C Accumulator

2000 Chevrolet Prizm Parts Questions & Experts Answers

• Q: How to replace the A/C Accumulator and recharge the refrigerant system on 2000 Chevrolet Prizm?

  A: While replacing the accumulator, also inject 60 milliliters (2.0 fl oz.) of refrigerant oil into the system. Finally, fire the refrigerant. Replace the cruise control actuator motor if it is available, and seal the exposed fittings to avoid exposure of the refrigeration system to dirt and moisture. Next, carefully detach the suction hose from the accumulator, followed by the accumulator hose from Evaporator and remove the accumulator bracket bolt. Push the accumulator up and out of the bracket. In regards to installation, one should use new lubricated with 525 viscosity mineral oil o-rings, insert the accumulator into the bracket and fasten the bolt with 13 n.m (10 lb ft). Install the suction hose to the accumulator and secure it with a torque of 47 n.m (35 lb ft), the accumulate hose attached with the evaperator and secure with a torque of 38 n.m (28 lb ft). Replace the cruise-control actuator motor if removed. Finally, de-gas and recharge the refrigerant circuit as well as test the a/c system for refrigerant leaks.