How to service the front crankshaft seal on 2000 Chevrolet Prizm?

The service of the front Crankshaft Seal starts by disconnecting the negative Battery Cable. Before removing the Crankshaft Pulley users should protect the Crankshaft by wrapping the screwdriver tip with tape. A screwdriver should be used to remove the Crankshaft front oil seal. The installation of new Crankshaft front oil seal requires chassis grease (GM P/N 1051344 or equivalent) as a lubricant. You can position the seal properly using a hammer with appropriate driver until it reaches the edge of the Crankshaft front oil seal retainer. Attain the Crankshaft Pulley and reinstall it while attaching the negative Battery Cable and securing the Battery Cable bolt with 15 nm (11 ft. Lbs.) torque. Finally, start the engine.

OEM 2000 Chevrolet Prizm Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Seals found

View related parts
2000 Chevrolet Prizm Rear Main Seal Part Number: 19205488
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing; Crankshaft Seal
- Position: Rear
- Replaces: 94856962
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.5 x 4.4 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19205488
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS
View related parts
2000 Chevrolet Prizm Crankshaft Seal Part Number: 94858992
Product Specifications
- Other Name: Seal, Engine Front Cover & Crankshaft Seal; Timing Cover Gasket; Timing Cover Seal; Front Cover Seal; Seal
- Position: Front
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.0 x 2.0 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 94858992
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS

2000 Chevrolet Prizm Crankshaft Seal

With a comprehensive array of OEM 2000 Chevrolet Prizm Crankshaft Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Prizm Crankshaft Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Prizm Crankshaft Seal Parts and Q&A

Q: How to service the front crankshaft seal on 2000 Chevrolet Prizm?
A: The service of the front Crankshaft Seal starts by disconnecting the negative Battery Cable. Before removing the Crankshaft Pulley users should protect the Crankshaft by wrapping the screwdriver tip with tape. A screwdriver should be used to remove the Crankshaft front oil seal. The installation of new Crankshaft front oil seal requires chassis grease (GM P/N 1051344 or equivalent) as a lubricant. You can position the seal properly using a hammer with appropriate driver until it reaches the edge of the Crankshaft front oil seal retainer. Attain the Crankshaft Pulley and reinstall it while attaching the negative Battery Cable and securing the Battery Cable bolt with 15 nm (11 ft. Lbs.) torque. Finally, start the engine.