How to service the camshaft position sensor on 2000 Chevrolet Venture?

Service of the Camshaft Position Sensor starts when you turn off the ignition and remove the serpentine Drive Belt. Detach the sensor electrical connector while extracting its bolt and sensor from the mounting location. Check the sensor for any signs of damage if it will remain in place. Wear patterns and cracks or leaking should be examined at this time. Before installation you must apply clean engine oil to the o-ring then discard it for replacement if there is damage present. Add the Camshaft Position Sensor to its place before torquing the retaining bolt to 10 n.m (8 lb ft). After reattaching the serpentine Drive Belt connect the sensor electrical connector.

OEM 2000 Chevrolet Venture Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2000 Chevrolet Venture Camshaft Position Sensor Part Number: 12567650
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Replaces: 24507588
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.9 x 4.2 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12567650
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2000 Chevrolet Venture Camshaft Position Sensor

With a comprehensive array of OEM 2000 Chevrolet Venture Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Venture Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Venture Camshaft Position Sensor Parts and Q&A

Q: How to service the camshaft position sensor on 2000 Chevrolet Venture?
A: Service of the Camshaft Position Sensor starts when you turn off the ignition and remove the serpentine Drive Belt. Detach the sensor electrical connector while extracting its bolt and sensor from the mounting location. Check the sensor for any signs of damage if it will remain in place. Wear patterns and cracks or leaking should be examined at this time. Before installation you must apply clean engine oil to the o-ring then discard it for replacement if there is damage present. Add the Camshaft Position Sensor to its place before torquing the retaining bolt to 10 n.m (8 lb ft). After reattaching the serpentine Drive Belt connect the sensor electrical connector.