OEM 2000 GMC Jimmy ABS Control Module

2000 GMC Jimmy Parts Questions & Experts Answers

• Q: How to service the ABS Control Module (310 ABS) on 2000 GMC Jimmy?

  A: One needs to remove the four T-25 TORX'83 screws that hold the ABS Control Module (310 ABS) to the BPMV with caution to prevent damaging either component through excessive force. Complete the connection space of the ABS Control Module to the BPMV by utilizing gentle pressure on the connector area until you can disconnect all four electrical cables. Extract the ABS Control Module totally from its housing position in the BPMV. New mounting screws should be used when installing the new ABS Control Module while also avoiding RTV and any other sealants on its gasket and mating surfaces. Affix the four electrical connectors to the ABS Control Module before placing the ABS Control Module onto the BPMV. Secure the four new T-25 Torx screws by torquing them to 5 Nm using an X-pattern style. The useful procedure involves tire size calibration with the Scan Tool before performing a Diagnostic System Check (310 ABS) or a Diagnostic System Check (325 ABS).