Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 19244886
Control Module

2000-2005 GM

Customer Questions & Expert Answers (4)
GM 19244886 Control Module
  • Part Description
    Module, Electronic Brake Control; ABS Control Module
  • Replaces
    12476248, 88935842, 88982299, 12478047
  • Manufacturer
    General Motors
Make sure this part fits
$1005.74 MSRP: $1587.98
You Save: $582.24 (37%)
Core Charge: $50.00
1
ADD TO CART
  • 2004 Chevy Blazer Control Module Diagram for 19244886
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 19244886

  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    2000-2004 Chevrolet S10Base, LS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    2000-2001 GMC JimmyDiamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    2000-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    2000-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 19244886 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19244886 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the ABS Control Module on Chevrolet Blazer? Posted by Customer
    A:
    A proper replacement of the ABS Control Module (ABSCM) requires complete cleaning of the region surrounding the Electronic Hydraulic Control Unit (EHCU) to stop contamination of removed ABS components. Start by unplugging electrical connectors from the ABSCM then remove its retention using four T 25-TORX® mounting screws connected to Brake Pressure Modulator Valve (BPMV). A tool must not be used to carefully remove the ABSCM component from the BPMV assembly. Prior to installation clean the surfaces where BPMV and ABSCM will mount using a fresh cloth. New mounting screws should be utilized for ABSCM installation because old screws are not reusable. It is essential to avoid applying RTV and all other sealants when working at the ABSCM gasket and mating areas. Mount the ABSCM onto its position on the BPMV before installing the four new T-25 TORX® screws which must be tightened to 5 Nm (39 inch lbs.) with an X-pattern. End the procedure by reconnecting ABSCM electrical connectors then perform tire calibration revisions through the Tire Size Calibration function in the Scan Tool.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the ABS Control Module on GMC Jimmy? Posted by Customer
    A:
    Starting the ABS Control Module replacement process requires complete cleaning of the area containing the Electronic Hydraulic Control Unit (EHCU) to avoid contaminating disassembled ABS components. The ABS Control Module requires you to disconnect its electrical connectors before using a T-25 TORX tool to remove the four mounting screws which hold the ABS Control Module to the Brake Pressure Modulator Valve (BPMV). Without using tools as a prying device, remove the ABS Control Module from the BPMV. The mounting surfaces of the BPMV must be cleaned by wiping them with a new cloth. As part of the new ABS Control Module installation, keep the old screws from reuse by using four fresh T-25 TORX(R) screws and follow the 5 Nm (39 inch lbs.) torque value in an X-shaped pattern. Reconnect the electrical connectors while performing a new tire calibration through the Scan Tool Tire Size Calibration function to set the correct tire size parameters for the vehicle on the new ABS Control Module.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be used for installation of the new EBCM for the 2000 GMC Jimmy? Posted by Customer
    A:
    Use new mounting screws with the new EBCM and avoid using RTV or any sealant on the EBCM gasket or mating surfaces.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Control Module 19244886 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19244886 Control Module is available in the market under the name GM ABS Control Module. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19244886 Control Module fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 19244886 maintains top performance when functioning as the Module, Electronic Brake Control; ABS Control Module unit. The component 19244886 is constructed from durable material and its dimensions span 7.6 x 6.4 x 3.6 inches while weighing 1.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of ABS Control Unit. The part 19244886 has available replacement options 12476248, 88935842, 88982299, 12478047. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.