How to service the MAP Sensor on 2000 GMC Jimmy?

Start servicing the manifold absolute pressure (MAP) sensor by disconnecting the negative Battery Cable. Examine the grommet and check all harness connectors for looseness. Replace the sensor based on the diagnostic results showing a defective MAP Sensor. Turn the MAP Sensor the correct way before your removal to protect the sensor and the Intake Manifold from damage. Pull the MAP Sensor upward with gentle rocking movements to remove it from the system and remove and dispose of the old MAP Sensor grommet. To install the MAP Sensor you must first implement a new grommet onto the sensor followed by both sensor installation and harness connector reattachment and lastly reattach the Battery Cable.

OEM 2000 GMC Jimmy MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2000 GMC Jimmy M.A.P. Sensor Part Number: 19418808
$73.36 MSRP: $125.98
You Save: $52.62 (42%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; Valve Assembly
- Replaces: 16249939, 09359409, 12614973, 16187556, 9359409
- Condition: New
- SKU: 19418808
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2000 GMC Jimmy Submodels:
- Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS

2000 GMC Jimmy MAP Sensor

With a comprehensive array of OEM 2000 GMC Jimmy MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 GMC Jimmy MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 GMC Jimmy MAP Sensor Parts and Q&A

Q: How to service the MAP Sensor on 2000 GMC Jimmy?
A: Start servicing the manifold absolute pressure (MAP) sensor by disconnecting the negative Battery Cable. Examine the grommet and check all harness connectors for looseness. Replace the sensor based on the diagnostic results showing a defective MAP Sensor. Turn the MAP Sensor the correct way before your removal to protect the sensor and the Intake Manifold from damage. Pull the MAP Sensor upward with gentle rocking movements to remove it from the system and remove and dispose of the old MAP Sensor grommet. To install the MAP Sensor you must first implement a new grommet onto the sensor followed by both sensor installation and harness connector reattachment and lastly reattach the Battery Cable.