How to replace the rear wiper motor on 2000 GMC Jimmy?

To change the rear Wiper Motor, you should remove the arm of the wiper from the shaft, next take off the nut and spacer from the shaft. Then, remove the interior trim panel and the electrical connector of the controller. Take out the Wiper Motor from the vehicle together with the two screws holding it in place. For installation, hold the Wiper Motor on the vehicle by using the two screws in a way that it is properly centered in the tailgate hole, tighten the screws to a 6.5 n.m (57 lb in). Join the electric connector to the device and, having reinstalled the interior trim panel, put the spacer and nut back on the car and tighten the nut to 8 n.m (70 lb in). Lastly, install the Wiper Arm back onto the car.

OEM 2000 GMC Jimmy Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Motors found

View related parts
2000 GMC Jimmy Front Motor
Part Number: 15036008
Product Specifications
- Other Name: Motor, Windshield Wiper Motor; Motor; Wiper Motor
- Replaces: 12365319, 12368703
- Item Weight: 4.20 Pounds
- Item Dimensions: 9.1 x 10.3 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15036008
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Jimmy Submodels:
- Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
2000 GMC Jimmy Wiper Motor, Rear
Part Number: 19210076
Product Specifications
- Other Name: Motor Assembly, Rear Window Wiper; Rear Motor; Motor, Rear Window Wiper/Washer
- Position: Rear
- Replaces: 22154965, 12365368, 12494790, 15053983
- Item Weight: 0.90 Pounds
- Item Dimensions: 17.3 x 8.4 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19210076
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Jimmy Submodels:
- Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS

2000 GMC Jimmy Wiper Motor

With a comprehensive array of OEM 2000 GMC Jimmy Wiper Motor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 GMC Jimmy Wiper Motor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 GMC Jimmy Parts Questions & Experts Answers

Q: How to replace the rear wiper motor on 2000 GMC Jimmy?
A: To change the rear Wiper Motor, you should remove the arm of the wiper from the shaft, next take off the nut and spacer from the shaft. Then, remove the interior trim panel and the electrical connector of the controller. Take out the Wiper Motor from the vehicle together with the two screws holding it in place. For installation, hold the Wiper Motor on the vehicle by using the two screws in a way that it is properly centered in the tailgate hole, tighten the screws to a 6.5 n.m (57 lb in). Join the electric connector to the device and, having reinstalled the interior trim panel, put the spacer and nut back on the car and tighten the nut to 8 n.m (70 lb in). Lastly, install the Wiper Arm back onto the car.