OEM 2000 GMC Savana 3500 Brake Calipers

2000 GMC Savana 3500 Brake Calipers Parts Questions & Experts Answers

• Q: How to replace the Brake Calipers on 2000 GMC Savana 3500?

  A: A mechanic should drain two-thirds of the brake fluid from the Brake Master Cylinder before replacing the brake caliper. Secure the vehicle on safety stands before you remove the wheel and tire. You can use a c-clamp or pliers to push down the front Brake Caliper Piston through the top of its housing over the inboard front Brake Pad. The front brake hose should be detached from the caliper while sealing the Brake Line with a plug to stop brake fluid contamination. Start by freeing the front brake caliper bolts then pull off the front brake caliper from the front brake rotor before extracting it from the vehicle. Replace any deteriorated caliper bolts of the front caliper upon detection since attempts to polish them should be avoided. Measure the caliper bolt bushings to detect signs of nicks or cuts as well as corrosion which may require replacement of faulty parts. Begin installation by positioning the front brake caliper correctly on the front brake rotor then drive in the front brake caliper bolts and sleeves while applying silicone paste for lubrication. Secure the front brake caliper bolts to 51 nm (38 ft. Lbs. Torque). Connect the front brake hose to the front brake caliper before measuring the distance from the front brake caliper to the bracket stops. The bracket ends need filing for achieving total clearance between 0.26 to 0.60 mm (0.010 to 0.024 inch) if needed before reinstalling the front brake caliper. Bleed the brake system after you have measured the individual clearances and summed their total value. Fill the Brake Master Cylinder at least 50% with fluid then pump the brake pedal till it becomes firm before driving the vehicle. Check Brake Master Cylinder fluid levels before you install the tire-and-wheel assembly and test the braking system and then remove safety stands when you lower the vehicle.