OEM 2000 GMC Savana 3500 Brake Disc

2000 GMC Savana 3500 Brake Disc Parts Questions & Experts Answers

• Q: How to Replace the Brake Disc on 2000 GMC Savana 3500?

  A: For disc replacement start by positioning safety stands under the vehicle to support it. The first step is tire removal followed by wheel and brake caliper removal. First step is to take out wheel bearings before you can remove the disc from the vehicle. Check all components for damage followed by cleaning and disc refinish when necessary. Reinstall the disc onto its original position on the vehicle after which install wheel bearings along with the seal. Reinstall the brake caliper while placing the brake caliper along with the tire and wheel assembly back on the vehicle. After removing safety stands you should lower the vehicle while pressing the brake pedal then finish the front brake discs and pads through burning. The correct tools that include (Safety Stands) and (Tire and Wheel Assembly Tool) and (Brake Caliper Tool) and (Wheel Hub Bearing Tool) and (Brake Disc Refinishing Tool) should be applied throughout this procedure.