How to replace the front door lock switch on 2001 Buick LeSabre?

Start by placing a flat-bladed tool on the front section of the switch plate to lift it gently from the door trim panel. The rear retainer tabs will uncouple after sliding the switch plate to the front position. Next disconnect the electrical connectors. The switchpack should be removed from the switch plate by using a small flat bladed tool to release its retainer tabs. Install the switchpack to the switch plate by snapping it into position before reconnecting the electrical connectors then placing the switch plate rear end into the door trim panel. The completion of the installation process requires you to press down on the switch plate's front section to activate the retainer clip.

OEM 2001 Buick LeSabre Door Lock Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Door Lock Switch found

View related parts
2001 Buick LeSabre Lock Switch Part Number: 19259952
Product Specifications
- Other Name: Switch, Door Electric And Vacuum Locks; Door Lock Switch
- Replaces: 25654436
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.1 x 2.0 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19259952
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2001 Buick LeSabre Door Lock Switch

With a comprehensive array of OEM 2001 Buick LeSabre Door Lock Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Buick LeSabre Door Lock Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Buick LeSabre Door Lock Switch Parts and Q&A

Q: How to replace the front door lock switch on 2001 Buick LeSabre?
A: Start by placing a flat-bladed tool on the front section of the switch plate to lift it gently from the door trim panel. The rear retainer tabs will uncouple after sliding the switch plate to the front position. Next disconnect the electrical connectors. The switchpack should be removed from the switch plate by using a small flat bladed tool to release its retainer tabs. Install the switchpack to the switch plate by snapping it into position before reconnecting the electrical connectors then placing the switch plate rear end into the door trim panel. The completion of the installation process requires you to press down on the switch plate's front section to activate the retainer clip.