How to replace the power seat switch on 2001 Buick LeSabre?

Disabling the SIR system is the first requirement before beginning replacement of the power seat switch. The power seat switch is accessible by first removing the seat cushion but keep the lumbar switch knob on to prevent breaking it. The flat bladed tool should be used to carefully remove each knob from its place. The Door Trim Pad Clip Remover (Tool J 38778) must be utilized to eliminate the push-in retainers on the seat cushion frame base before removing the power seat switch bezel. You must remove the J channel retainers from the seat cushion frame to the seat cushion cover before getting to the power seat switch bracket. Employ the Door Trim Pad Clip Remover (J 38778) to unfasten all push-in retention elements on the power seat switch bracket. You should remove the power seat switch and its bracket from the seat cushion frame by following the wiring harness path for damage prevention when reinstalling. Position the flat bladed tool on each power seat switch before removing it from the bracket after disconnecting the electrical connectors. Install power seat switches inside the switch bracket before you reintegrate the wiring harness correctly and connect the electrical connectors to the power seat switches. Prepare the seat cushion frame by sliding the bracket holding the switches in an upward direction. Then fasten the bracket with switches by using retainers and set the seat cushion cover over the switches with their holes lining up with the switch assembly. Fit the power seat switch bezel on top of the switches then install its shelf fasteners. As the final step install the power seat switch knobs along with reiterating the seat cushion replacement and activating the SIR system.

OEM 2001 Buick LeSabre Seat Switch

Seat Adjust Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Seat Switches found

View related parts
2001 Buick LeSabre Switch, Driver Side Part Number: 25654438
Product Specifications
- Other Name: Switch Assembly-Driver Seat Heater; Seat Heater Switch; Switch, Front/Rear Seat Heater
- Position: Driver Side
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.6 x 2.6 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25654438
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2001 Buick LeSabre Seat Switch, Front Part Number: 12450265
Product Specifications
- Other Name: Switch, Front Seat Adjuster; Power Seat Switch; Adjuster Switch
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.1 x 3.0 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12450265
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2001 Buick LeSabre Seat Switch, Front Driver Side Part Number: 12450263
$77.86 MSRP: $115.86
You Save: $38.00 (33%)
Product Specifications
- Other Name: Switch, Front Seat Adjuster; Power Seat Switch; Switch
- Position: Front Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 5.8 x 3.4 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12450263
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2001 Buick LeSabre Seat Switch, Black, Driver Side Part Number: 25657766
Product Specifications
- Other Name: Switch Assembly-Driver Seat Lumbar Control *Black; Power Seat Switch; Switch; Switch, Front Seat Lumbar
- Position: Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.6 x 1.8 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25657766
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2001 Buick LeSabre Switch, Front Part Number: 25689593
Product Specifications
- Other Name: Switch, Front Seat Adjuster; Power Seat Switch
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.3 x 1.4 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25689593
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2001 Buick LeSabre Seat Switch, Front Passenger Side Part Number: 12450264
Product Specifications
- Other Name: Switch, Front Seat Adjuster; Power Seat Switch; Adjuster Switch; Switch
- Position: Front Passenger Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.2 x 3.3 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12450264
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2001 Buick LeSabre Switch, Driver Side Part Number: 25697356
Product Specifications
- Other Name: Switch, Driver Seat Adjuster Memory; Window Switch; Switch, Front Seat Adjuster
- Position: Driver Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.1 x 2.0 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25697356
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2001 Buick LeSabre Memory Switch, Charcoal, Driver Side Part Number: 25697354
Product Specifications
- Other Name: Switch, Driver Seat Adjuster Memory; Power Seat Switch; Window Switch; Switch; Switch, Front Seat Adjuster
- Position: Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 1.9 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25697354
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2001 Buick LeSabre Switch, Red, Driver Side Part Number: 25697353
Product Specifications
- Other Name: Switch, Driver Seat Adjuster Memory; Window Switch; Switch, Front Seat Adjuster
- Position: Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.2 x 2.0 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25697353
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2001 Buick LeSabre Knob, Front Part Number: 25674588
Product Specifications
- Other Name: Knob, Front Seat Adjuster
- Position: Front
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.6 x 1.0 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25674588
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2001 Buick LeSabre Switch, Blue, Driver Side Part Number: 25697355
Product Specifications
- Other Name: Window Switch; Switch, Front Seat Adjuster
- Position: Driver Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25697355
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2001 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2001 Buick LeSabre Seat Switch

With a comprehensive array of OEM 2001 Buick LeSabre Seat Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Buick LeSabre Seat Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Buick LeSabre Seat Switch Parts and Q&A

Q: How to replace the power seat switch on 2001 Buick LeSabre?
A: Disabling the SIR system is the first requirement before beginning replacement of the power seat switch. The power seat switch is accessible by first removing the seat cushion but keep the lumbar switch knob on to prevent breaking it. The flat bladed tool should be used to carefully remove each knob from its place. The Door Trim Pad Clip Remover (Tool J 38778) must be utilized to eliminate the push-in retainers on the seat cushion frame base before removing the power seat switch bezel. You must remove the J channel retainers from the seat cushion frame to the seat cushion cover before getting to the power seat switch bracket. Employ the Door Trim Pad Clip Remover (J 38778) to unfasten all push-in retention elements on the power seat switch bracket. You should remove the power seat switch and its bracket from the seat cushion frame by following the wiring harness path for damage prevention when reinstalling. Position the flat bladed tool on each power seat switch before removing it from the bracket after disconnecting the electrical connectors. Install power seat switches inside the switch bracket before you reintegrate the wiring harness correctly and connect the electrical connectors to the power seat switches. Prepare the seat cushion frame by sliding the bracket holding the switches in an upward direction. Then fasten the bracket with switches by using retainers and set the seat cushion cover over the switches with their holes lining up with the switch assembly. Fit the power seat switch bezel on top of the switches then install its shelf fasteners. As the final step install the power seat switch knobs along with reiterating the seat cushion replacement and activating the SIR system.