Make sure this part fits

GM 12450264
Seat Switch, Front Passenger Side

2000-2009 GM

Customer Questions & Expert Answers (23)
GM 12450264 Seat Switch, Front Passenger Side
  • Part Description
    Switch, Front Seat Adjuster; Power Seat Switch
  • Position
    Front Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    2003-2007 Cadillac CTSBase, Luxury, Luxury Sport, V6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2005-2006 Cadillac STSBase, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    2001-2003 Oldsmobile AuroraBase6 Cyl 3.5 L GAS, 8 Cyl 4.0 L GAS
    2000-2005 Pontiac BonnevilleGXP, SE, SLE, SSEi6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12450264 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12450264 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the lumbar switch for the 2001 Buick LeSabre? Posted by Customer
    A:
    First, remove the power seat switch assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the first step to replace the lumbar switch for the 2004 Buick LeSabre? Posted by Customer
    A:
    First, remove the power seat switch assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done after covering the switches with the seat cushion cover for the 2002 Buick LeSabre? Posted by Customer
    A:
    Align the holes with the switch assembly, then position the power seat switch bezel over the switches and install the bezel fasteners.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    How do you begin to replace the memory seat switch for the 2003 Buick LeSabre? Posted by Customer
    A:
    Use a small flat bladed tool to gently pry it out of the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the installation process for the power seat switch for the 2005 Buick LeSabre? Posted by Customer
    A:
    Place the power seat switch into the switch bracket, reinstall the wiring harness, and connect the electrical connectors to the power seat switches.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    How should the wiring harness be installed during reassembly for the 2003 Buick LeSabre? Posted by Customer
    A:
    Install it in its original position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done after connecting the electrical connectors for the 2001 Buick LeSabre? Posted by Customer
    A:
    Slide the bracket with the switches upward into the seat cushion frame and secure it with the retainers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    How do you remove the push-in retainers on the seat cushion frame for the 2000 Buick LeSabre? Posted by Customer
    A:
    Utilize the Door Trim Pad Clip Remover (J 38778).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    How is the power seat switch secured to the seat cushion frame for the 2007 Cadillac CTS? Posted by Customer
    A:
    With a push-in fastener.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the first step to replace the power seat switch for the 2006 Cadillac CTS? Posted by Customer
    A:
    Disable the SIR system for both the driver and passenger seats.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    How do you begin replacing the driver seat adjuster memory switch for the 2006 Cadillac CTS? Posted by Customer
    A:
    Insert a flat-bladed tool under the front edge of the switch to release the retainer from the door trim panel, then disconnect the electrical connector from the lock switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    How do you access the power seat switch for the 2004 Cadillac CTS? Posted by Customer
    A:
    Remove the seat cushion from the adjuster track.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done after snapping the door lock switch into the bezel for the 2007 Cadillac CTS? Posted by Customer
    A:
    Connect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    How do you secure the power seat switch for the 2003 Cadillac CTS? Posted by Customer
    A:
    Secure it with the push-in fastener.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should you do after removing the power seat switch for the 2005 Cadillac CTS? Posted by Customer
    A:
    Slide the power seat switch from the seat cushion frame, noting the correct routing of the electrical wiring to avoid damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    How do you access the power seat switch for the 2004 Cadillac SRX? Posted by Customer
    A:
    Remove the seat cushion from the adjuster track.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done after removing the trim panel for the 2008 Cadillac SRX? Posted by Customer
    A:
    Next, take out the folding seat switch from the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the first step to replace the Rear Seat Number 2 Folding Actuator Switch for the 2009 Cadillac SRX? Posted by Customer
    A:
    First, remove the body side rear trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the first step to replace the folding seat switch in the rear seat No.2 for the 2006 Cadillac SRX? Posted by Customer
    A:
    First, remove the body side rear trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the final step after installing the switch for the 2007 Cadillac SRX? Posted by Customer
    A:
    Reinstall the body side rear trim panel and calibrate the seat as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    How do you access the power seat switch for the 2005 Cadillac SRX? Posted by Customer
    A:
    Remove the seat cushion from the adjuster track.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the final step after reinstalling the body side rear trim panel for the 2005 Cadillac SRX? Posted by Customer
    A:
    Calibrate the seat as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Seat Switch, Front Passenger Side 12450264 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12450264 Seat Switch, Front Passenger Side is available in the market under the name GM Seat Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12450264 Seat Switch, Front Passenger Side fits certain Cadillac CTS, SRX, STS models, as well as Buick LeSabre. Additionally, it is compatible with Pontiac Bonneville and Oldsmobile Aurora models.
The original GM component designated by manufacturer part number 12450264 maintains top performance when functioning as the Switch, Front Seat Adjuster; Power Seat Switch unit at its Front Passenger Side. The component 12450264 is constructed from durable material and its dimensions span 6.2 x 3.3 x 3.1 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Adjuster Switch; Switch. The part 12450264 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.