How to replace the Turn Signal Switch and hazard switch on 2001 Buick LeSabre?

Before working on the Turn Signal Switch you must shut off the sir system. Take out the Steering Column trim cover using the Turn Signal Switch retaining screws and disconnect its electrical connections before removing the switch. Set the Turn Signal Switch onto the Steering Column and attach it with its retaining screws before tightening them to 7 nm (62 inch lbs.). Feed the electrical cables through and restore their connections to the Steering Column trim before replacing its covers. Finally, enable the sir system.

OEM 2001 Buick LeSabre Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Turn Signal Switch found

View related parts
2001 Buick LeSabre Turn Signal Switch Part Number: 26057323
Product Specifications
- Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer, Wiper & Washer (W/Lever); Multi Purpose Switch; Signal Switch; Switch, Windshield Wiper Control; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
- Item Weight: 2.30 Pounds
- Item Dimensions: 7.2 x 6.1 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26057323
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2001 Buick LeSabre Turn Signal Switch

With a comprehensive array of OEM 2001 Buick LeSabre Turn Signal Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Buick LeSabre Turn Signal Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Buick LeSabre Turn Signal Switch Parts and Q&A

Q: How to replace the Turn Signal Switch and hazard switch on 2001 Buick LeSabre?
A: Before working on the Turn Signal Switch you must shut off the sir system. Take out the Steering Column trim cover using the Turn Signal Switch retaining screws and disconnect its electrical connections before removing the switch. Set the Turn Signal Switch onto the Steering Column and attach it with its retaining screws before tightening them to 7 nm (62 inch lbs.). Feed the electrical cables through and restore their connections to the Steering Column trim before replacing its covers. Finally, enable the sir system.