OEM 2001 Buick Park Avenue Door Check

2001 Buick Park Avenue Parts Questions & Experts Answers

• Q: How to replace the door check link on 2001 Buick Park Avenue?

  A: Begin the replacement of the door check by opening the door while eliminating the door trim panel. The procedure starts with removing the door control module while also taking away the water deflector when required. Proceed by removing the close-out grommet as well as the two check to door fasteners and the check to pillar fasteners. The door check can be extracted inside the door area. To put in the replacement check, insert the component into the door before driving the check studs through the access holes in the door inner panel. Then tighten the check to door fasteners to 9 N.m (80 lb in). The next step is to fasten the check arm between the door hinge pillar fasteners while tightening them to 9 N.m (80 lb in). The installation process begins with replacing the close-out grommet while the water deflector gets installed before putting back the door control module and ending with door trim panel reinstallation.