OEM 2001 Buick Park Avenue Window Motor

2001 Buick Park Avenue Parts Questions & Experts Answers

• Q: How to replace the front side door window motor on 2001 Buick Park Avenue?

  A: The replacement process of front side door window motors starts with taking out the door trim panel first. You should first remove both the door control module and the water deflector from the system. Multiplex the speaker assembly and the window before continuing. The first step involves disconnecting both the lock rod and the outside handle rod before proceeding to remove the three fasteners from the window Door Latch Assembly and the two fasteners at the top of the module. The rest of the fasteners need loosening before removing the module assembly. The process of door latch removal requires detachment of inside Door Handle and lock rods from the door latch through retainer (1, 2) disengagement for subsequent door latch elevation from the retainer. To install the door latch you should position it on the retainer then connect both inside Door Handle and lock rods to the door latch through clip closure (1, 2). After installing the outside Door Handle rod to the retainer users can easily put it in place before connecting the electrical connectors to the door latch. Begin installing fasteners in the module before placing the module into the door and position the fasteners to the designated keyhole slots on the door. Start with installing the remaining fasteners on the module before tightening them to 10 n.m (89 lb in). After that, the three fasteners attaching to the latch assembly should be tightened to 10 n.m (89 lb in). First attach the handle along with the lock rods to the outside Door Handle before installing the window and speaker assembly along with trim panel bracket and water deflector. Put in the door control module along with the door trim panel as the final step.