Make sure this part fits

GM 19153541
Window Regulator, Front

1991-2005 GM

Customer Questions & Expert Answers (8)
GM 19153541 Window Regulator, Front
GM 19153541 Window Regulator, Front
  • Part Description
    Motor, Front Side Door Window Regulator; Window Motor
  • Position
    Front
  • Replaces
    19151983, 22143945, 22138767, 22154977, 22154978
  • Manufacturer
    General Motors
Make sure this part fits
$134.92 MSRP: $370.82
You Save: $235.90 (64%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1991-1993 Buick Commercial ChassisBase8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    1992-1999 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    1991-2005 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    1995-1999 Buick RivieraBase6 Cyl 3.8 L GAS
    1991-1996 Buick RoadmasterBase, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    1994-1999 Cadillac DeVilleBase, Concours, d'Elegance8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
    1992-2002 Cadillac EldoradoBase, ESC, ETC, Sport, Touring8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
    1993 Cadillac FleetwoodBase, Brougham8 Cyl 5.7 L GAS
    1992-1997 Cadillac SevilleBase, SLS, STS8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
    1991-1996 Chevrolet CapriceBase, Classic, Classic LS, Classic LTZ6 Cyl 4.3 L GAS, 8 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19153541 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19153541 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the power window motor on Buick Park Avenue? Posted by Customer
    A:
    You should start the replacement process by lifting your car window to its highest position. You need to start by taking out the door trim panel after which remove the water deflector. Start by disconnecting electrical connector then remove two fasteners holding the power window motor before finally extracting the motor itself. Position the new motor with care after installation to let the motor gear properly engage the regulator gear and make minor adjustments to the window to achieve good contact with the window module. The installation process includes both motor fastener attachment and reattachment of electric wires. The installation ends with placing back the water deflector as well as the door trim panel.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front door window motor on Cadillac Eldorado? Posted by Customer
    A:
    The front door window regulator motor replacement starts with removing the door trim panel together with the water deflector. Remove the retaining nuts and the motor after disconnecting its electrical connector. Follow the fastener notice to install the new motor while you should tighten the window motor nuts to 10 N.m (89 lb in). Reinstall the water deflector and door trim panel after you reconnect the electrical connector and check the window operation followed by motor installation with proper fastener notice and motor nut torque at 10 N.m (89 lb in). Professional installer must eliminate the counterbalance spring prior to regulator motor service due to its potential to cause severe injuries because the regulator lift arms maintain continuous tension from this spring.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the door window motor on Cadillac Eldorado? Posted by Customer
    A:
    The first step to replace the door window regulator motor involves taking out the door trim panel combined with the water deflector. The electrical connector needs to be disconnected followed by retaining nuts and motor removal. You should install the new motor according to the fastener notice before tightening the window motor nuts to 10 N.m (89 lb in). After reconnecting the electrical connector you must check the window operation before reinstalling both the door trim panel and water deflector. The removal of the counterbalance spring must happen before regulator motor servicing because the spring tension puts the regulator lift arms at risk of causing serious injury.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for tightening the fasteners for the 2001 Buick Park Avenue? Posted by Customer
    A:
    Tighten them to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Motor
    Q:
    What is the torque specification for tightening the fasteners for the 2000 Buick Park Avenue? Posted by Customer
    A:
    Tighten them to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Motor
    Q:
    What must be removed to take out the power window motor for the 2004 Buick Park Avenue? Posted by Customer
    A:
    Remove the two fasteners securing the power window motor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Motor
    Q:
    What is the first step in the replacement process for the 2001 Cadillac Eldorado? Posted by Customer
    A:
    Remove the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Motor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Window Regulator, Front 19153541 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19153541 Window Regulator, Front is available in the market under the name GM Window Motor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19153541 Window Regulator, Front fits certain Chevrolet Impala, Caprice models, as well as Cadillac DeVille, Eldorado, Fleetwood. Additionally, it is compatible with Buick Riviera, LeSabre, Roadmaster and Pontiac Bonneville models.
The original GM component designated by manufacturer part number 19153541 maintains top performance when functioning as the Motor, Front Side Door Window Regulator; Window Motor unit at its Front. The component 19153541 is constructed from durable material and its dimensions span 8.0 x 4.4 x 2.4 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Motor; Motor, Door And End Gate Electrical; Motor, Front Door Window Regulator; Motor, Rear Door Window Regulator. The part 19153541 has available replacement options 19151983, 22143945, 22138767, 22154977, 22154978. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.