OEM 2000 Buick Park Avenue Window Motor

2000 Buick Park Avenue Parts Questions & Experts Answers

• Q: How to replace the front side door window motor on 2000 Buick Park Avenue?

  A: You should start your replacement of the front side door Window Motor by taking out the door trim panel. Take out the door control module followed by the water deflector and then proceed to remove the speaker assembly. First disconnect the window unit while separating the lock rod and outside handle rod. Start with removing three fasteners from the Door Latch Assembly after which you can take out the two upper fasteners from the module while gently loosening the remaining fasteners before removing the module assembly. Lift out the door latch from the retainer by releasing the retainers (1, 2). First place the door latch onto the retainer before attaching the inside Door Handle together with lock rods through clips (1, 2). After mounting the outside Door Handle rod to its retainer you can easily install it before fitting electrical connectors to the door latch. Begin by fastening the fasteners on the module and mount it into the door while the fasteners point toward the keyhole openings. The installer inserts all remaining fasteners before tightening them to 10 n.m (89 lb in). Subsequently they install three fasteners to the latch assembly at 10 n.m (89 lb in). Start by attaching the handle rod to the door outside handle before proceeding with the speaker assembly then trim panel bracket and water deflector installation. The last task involves adding the door control module alongside the door trim panel.