How to replace the HVAC control module on 2001 Buick Park Avenue?

Begin HVAC Control Module replacement by removing the right ip cluster trim plate. Begin by removing the two fasteners that hold the heater and a/c control in place. Afterward disconnect its electrical connectors while pulling the heater and a/c control toward the rear. Installation requires hooking up electrical connectors to the heater and a/c control followed by heater and a/c control placement. Fasten the hardware components with a torque value of 1.8 n.m (16 lb in). Reinstall the right ip cluster trim plate while performing needed actuator calibration.

OEM 2001 Buick Park Avenue HVAC Control Module

Heater Control Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 HVAC Control Module found

View related parts
2001 Buick Park Avenue Control Module Part Number: 52485682
Product Specifications
- Other Name: Module Assembly, Blower Motor Control; Module, A/C Electric Temperature And Motor Control
- Item Weight: 1.30 Pounds
- Item Dimensions: 8.4 x 5.3 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52485682
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2001 Buick Park Avenue HVAC Control Module

With a comprehensive array of OEM 2001 Buick Park Avenue HVAC Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Buick Park Avenue HVAC Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Buick Park Avenue HVAC Control Module Parts and Q&A

Q: How to replace the HVAC control module on 2001 Buick Park Avenue?
A: Begin HVAC Control Module replacement by removing the right ip cluster trim plate. Begin by removing the two fasteners that hold the heater and a/c control in place. Afterward disconnect its electrical connectors while pulling the heater and a/c control toward the rear. Installation requires hooking up electrical connectors to the heater and a/c control followed by heater and a/c control placement. Fasten the hardware components with a torque value of 1.8 n.m (16 lb in). Reinstall the right ip cluster trim plate while performing needed actuator calibration.