How to replace the seat belt for the driver or passenger on 2001 Cadillac Eldorado?

The driver or passenger seat belt replacement begins with seating the seat at its maximum forward position while removing the carpet retainer. To acquire access to the lap retractor anchor bolt beneath the carpet you must pull back the carpeting before removing the bolt which keeps the lap retractor attached to the inner rocker. Begin by taking off the fastener attached to the seat back headrest guide loop and afterwards extract the belt from the guide before removing the quarter trim panel. Detach the shoulder belt from its position inside the headlining cover before removing the reading and courtesy lamps while avoiding any damage to both components during the process. Lower the rear corner of the fabric to allow access to the roof retractor bolts along with disconnecting the electrical connector and removing the bolts to extract the shoulder belt retractor unit. The shoulder belt retractor and bolts require installation first and tightening until they reach 24 N.m (18 lb ft) before connecting the electrical connector. After installing the headliner and courtesy/reading lamps you should put in the shoulder belt through the headlining cover and fix the guide loop with a screw tightened to 2 N.m (18 lb in). Verify that the anti-rotation tab found on the retractor rests within the correct spot in the inner rocker panel while also confirming the seat belt remains untwisted. Place the floor retractor with its mounting bolt and tighten the bolts to 41 N.m (30 lb ft). Then install the carpet retainer before moving the seat.

OEM 2001 Cadillac Eldorado Seat Belt

Seat Safety Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Seat Belts found

View related parts
2001 Cadillac Eldorado Lap Belt, Black, Rear Center
Part Number: 12530861
$33.28 MSRP: $225.45
You Save: $192.17 (86%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Kit, Rear Seat Center *Black; Lap Belt Assembly; Belt Kit, Seat Belt
- Position: Rear Center
- Item Weight: 2.50 Pounds
- Item Dimensions: 9.8 x 8.9 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12530861
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Eldorado Submodels:
- ESC, ETC | 8 Cyl 4.6 L GAS
View related parts
2001 Cadillac Eldorado Lap & Shoulder Belt
Part Number: 88950715
Product Specifications
- Other Name: Belt Kit, Seat Belt; Retractor Assembly
- Position: Driver Side
- Item Weight: 3.60 Pounds
- Item Dimensions: 12.5 x 7.3 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88950715
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Eldorado Submodels:
- ESC, ETC | 8 Cyl 4.6 L GAS
View related parts
2001 Cadillac Eldorado Lap & Shoulder Belt
Part Number: 88950720
Product Specifications
- Other Name: Belt Kit, Seat Belt; Retractor Assembly
- Position: Passenger Side
- Replaces: 88893555
- Item Weight: 4.20 Pounds
- Item Dimensions: 10.8 x 6.6 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88950720
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Eldorado Submodels:
- ESC, ETC | 8 Cyl 4.6 L GAS
View related parts
2001 Cadillac Eldorado Lap & Shoulder Belt, Driver Side
Part Number: 88893563
Product Specifications
- Other Name: Belt Kit, Seat Belt; Retractor Assembly
- Position: Driver Side
- Item Weight: 2.40 Pounds
- Item Dimensions: 11.1 x 6.4 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88893563
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Eldorado Submodels:
- ESC, ETC | 8 Cyl 4.6 L GAS
View related parts
2001 Cadillac Eldorado Lap & Shoulder Belt, Passenger Side
Part Number: 88893559
Product Specifications
- Other Name: Belt Kit, Seat Belt; Retractor Assembly
- Position: Passenger Side
- Item Weight: 2.40 Pounds
- Item Dimensions: 6.9 x 6.4 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88893559
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Eldorado Submodels:
- ESC, ETC | 8 Cyl 4.6 L GAS
View related parts
2001 Cadillac Eldorado Buckle
Part Number: 88948271
Product Specifications
- Other Name: Belt Kit, Seat Belt; Latch
- Position: Driver Side
- Replaces: 12369840
- Item Weight: 0.80 Pounds
- Item Dimensions: 19.1 x 5.2 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88948271
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Eldorado Submodels:
- ESC, ETC | 8 Cyl 4.6 L GAS
View related parts
2001 Cadillac Eldorado Buckle
Part Number: 88948274
Product Specifications
- Other Name: Belt Kit, Seat Belt; Latch
- Position: Passenger Side
- Replaces: 12532052
- Item Weight: 0.70 Pounds
- Item Dimensions: 19.2 x 3.9 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88948274
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Eldorado Submodels:
- Base, ESC, ETC | 8 Cyl 4.6 L GAS

2001 Cadillac Eldorado Seat Belt

With a comprehensive array of OEM 2001 Cadillac Eldorado Seat Belt, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Cadillac Eldorado Seat Belt are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Cadillac Eldorado Seat Belt Parts Questions & Experts Answers

Q: How to replace the seat belt for the driver or passenger on 2001 Cadillac Eldorado?
A: The driver or passenger seat belt replacement begins with seating the seat at its maximum forward position while removing the carpet retainer. To acquire access to the lap retractor anchor bolt beneath the carpet you must pull back the carpeting before removing the bolt which keeps the lap retractor attached to the inner rocker. Begin by taking off the fastener attached to the seat back headrest guide loop and afterwards extract the belt from the guide before removing the quarter trim panel. Detach the shoulder belt from its position inside the headlining cover before removing the reading and courtesy lamps while avoiding any damage to both components during the process. Lower the rear corner of the fabric to allow access to the roof retractor bolts along with disconnecting the electrical connector and removing the bolts to extract the shoulder belt retractor unit. The shoulder belt retractor and bolts require installation first and tightening until they reach 24 N.m (18 lb ft) before connecting the electrical connector. After installing the headliner and courtesy/reading lamps you should put in the shoulder belt through the headlining cover and fix the guide loop with a screw tightened to 2 N.m (18 lb in). Verify that the anti-rotation tab found on the retractor rests within the correct spot in the inner rocker panel while also confirming the seat belt remains untwisted. Place the floor retractor with its mounting bolt and tighten the bolts to 41 N.m (30 lb ft). Then install the carpet retainer before moving the seat.