How to replace the Exhaust Pipe on 2001 Chevrolet Camaro?

Begin the exhaust crossover pipe replacement by elevating and sustaining the automobile. Disassemble both hanger bolts of the Catalytic Converter together with its hanger component. Begin by softening the exhaust manifold pipe nuts on both sides before taking out the Catalytic Converter nuts from each side. Position the crossover pipe backward while removing it from the left and right Catalytic Converter studs located inside the exhaust Muffler. To install the crossover pipe position it through the exhaust Muffler while it spans both left and right Catalytic Converter studs before lining up all parts. Start by attaching and torquing the Catalytic Converter nuts to 25 nm (18 ft. Lbs.) on each right side followed by torquing the left side nuts to the same value. Right-side exhaust manifold pipe nuts receive 35 nm torque measurement before left-side nuts achieve the same torque value. The Catalytic Converter hanger and its bolts should be installed before using a torque wrench to tighten them to 41 nm (30 ft. Lbs.). The procedure ends by lowering the vehicle from the jack stand.

OEM 2001 Chevrolet Camaro Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Exhaust Pipes found

View related parts
2001 Chevrolet Camaro Muffler & Pipe
Part Number: 10414654
Product Specifications
- Other Name: Muffler, Exhaust; Exhaust Pipe; Muffler; Muffler, Exhaust Tail Pipe
- Replaces: 10407347
- Item Weight: 42.20 Pounds
- Item Dimensions: 86.3 x 42.2 x 14.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10414654
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Camaro Submodels:
- Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
2001 Chevrolet Camaro Catalytic Converter
Part Number: 12564498
Product Specifications
- Other Name: Converter Assembly-3Way Catalytic (W/Exhaust Manifold P; Exhaust Pipe; Converter & Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Item Weight: 24.40 Pounds
- Item Dimensions: 49.4 x 26.3 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12564498
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Camaro Submodels:
- Base | 6 Cyl 3.8 L GAS
View related parts
2001 Chevrolet Camaro Muffler & Pipe
Part Number: 10436321
Product Specifications
- Other Name: Muffler, Exhaust; Exhaust Pipe; Muffler; Muffler, Exhaust Tail Pipe
- Replaces: 10407349, 10421501, 10409537, 10406095
- Item Weight: 40.10 Pounds
- Item Dimensions: 84.2 x 43.7 x 15.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10436321
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Camaro Submodels:
- Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
2001 Chevrolet Camaro Muffler & Pipe
Part Number: 10414653
Product Specifications
- Other Name: Muffler, Exhaust; Exhaust Pipe; Muffler; Muffler, Exhaust Tail Pipe
- Replaces: 10407346
- Item Weight: 39.90 Pounds
- Item Dimensions: 80.8 x 48.2 x 16.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10414653
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Camaro Submodels:
- Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
2001 Chevrolet Camaro Muffler & Pipe
Part Number: 10306197
Product Specifications
- Other Name: Muffler, Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler; Muffler, Exhaust Tail Pipe
- Replaces: 10272929, 10414650
- Item Weight: 29.90 Pounds
- Item Dimensions: 84.2 x 40.8 x 15.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10306197
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Camaro Submodels:
- Base | 6 Cyl 3.8 L GAS
View related parts
2001 Chevrolet Camaro Muffler & Pipe
Part Number: 10306198
Product Specifications
- Other Name: Muffler, Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler; Muffler, Exhaust Tail Pipe
- Replaces: 10272931, 10414652
- Item Weight: 32.30 Pounds
- Item Dimensions: 84.8 x 46.8 x 15.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10306198
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Camaro Submodels:
- Base | 6 Cyl 3.8 L GAS
View related parts
2001 Chevrolet Camaro Intermediate Pipe
Part Number: 10407880
Product Specifications
- Other Name: Pipe, Exhaust Pipe; Exhaust Pipe
- Item Weight: 13.70 Pounds
- Item Dimensions: 41.6 x 32.8 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10407880
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Camaro Submodels:
- Z28, Z28 SS | 8 Cyl 5.7 L GAS

2001 Chevrolet Camaro Exhaust Pipe

With a comprehensive array of OEM 2001 Chevrolet Camaro Exhaust Pipe, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Camaro Exhaust Pipe are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Camaro Exhaust Pipe Parts Questions & Experts Answers

Q: How to replace the Exhaust Pipe on 2001 Chevrolet Camaro?
A: Begin the exhaust crossover pipe replacement by elevating and sustaining the automobile. Disassemble both hanger bolts of the Catalytic Converter together with its hanger component. Begin by softening the exhaust manifold pipe nuts on both sides before taking out the Catalytic Converter nuts from each side. Position the crossover pipe backward while removing it from the left and right Catalytic Converter studs located inside the exhaust Muffler. To install the crossover pipe position it through the exhaust Muffler while it spans both left and right Catalytic Converter studs before lining up all parts. Start by attaching and torquing the Catalytic Converter nuts to 25 nm (18 ft. Lbs.) on each right side followed by torquing the left side nuts to the same value. Right-side exhaust manifold pipe nuts receive 35 nm torque measurement before left-side nuts achieve the same torque value. The Catalytic Converter hanger and its bolts should be installed before using a torque wrench to tighten them to 41 nm (30 ft. Lbs.). The procedure ends by lowering the vehicle from the jack stand.