OEM 2001 Chevrolet Camaro Rack And Pinion

2001 Chevrolet Camaro Parts Questions & Experts Answers

• Q: How to replace the Rack and Pinion steering gear on 2001 Chevrolet Camaro?

  A: Begin Rack And Pinion replacement work by extracting the intermediate Steering Shaft from the Rack And Pinion assembly. Place a drainage container under the vehicle and unfasten the Rack And Pinion's inlet and outlet hoses connecting to the Rack And Pinion unit. First detach the outer tie rods from the steering knuckles then proceed to remove both front suspension support braces. After you disconnect the Rack And Pinion mounting nuts and bolts, you can pull the Rack And Pinion out of the vehicle. Position the Rack And Pinion back into the vehicle by installing Rack And Pinion mounting bolts and nuts then tighten them to 85 nm (63 ft. Lbs.). Position the intermediate Steering Shaft onto the Rack And Pinion before adding both front suspension support braces and outer tie rods to their respective steering knuckles. Secure both inlet hose (2) and outlet hose (3) onto the Rack And Pinion while tightening each to 28 nm (21 ft. Lbs.). Complete the power steering system bleeding while lowering the vehicle then pull out the drain pan positioned underneath it.